Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ANGEL STONE USA LLC

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of ANGEL STONE USA LLC in 680 LANGFORD DRIVE, NORCROSS, GA 30071 (NAICS 327991). OSHA activity number 348764523.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Angel Stone USA LLC — free Get an email when a new federal OSHA severe-injury report for Angel Stone USA LLC is published. One employer, no account, unsubscribe in one click.
Establishment
ANGEL STONE USA LLC
Site address
680 LANGFORD DRIVE
City
NORCROSS
State
GA
ZIP
30071
Mailing
680 LANGFORD DRIVE, NORCROSS, GA 30071
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
327991
Employees
3
Ownership type
A

5 citations on file for this inspection.

1910.134 D01 I

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 10, 2026
Penalty
Initial $3,972 · Current $3,972

Hazardous substances 9000

29 CFR  1910.134(d)(1)(i): Selection of appropriate respirators was not based on the respiratory hazard(s) to which the worker was exposed and user factors that affect respirator performance and reliability:  a) Stone Cutting Area: On or about March 5, 2026, and at times prior, the employer exposed employees to respiratory hazards, in that the employer failed to ensure the respirator selection was based on the site specific hazards encountered for employees tasked with stone cutting granite slabs.
Recent events (1)
  • — Z (S) $3972

1910.134 K06

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 10, 2026
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR  1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:  a) Stone Cutting Area: On or about March 5, 2026, and at times prior, the employer exposed employees to respiratory hazards, in that the employer failed to ensure the information in Appendix D of 29 CFR 1910.134 was provided to employees voluntarily wearing N-95 respirators.
Recent events (1)
  • — Z (S) $0

1910.1053 C

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 10, 2026
Penalty
Initial $3,972 · Current $3,972

Hazardous substances 9000

29 CFR  1910.1053(c): The employer did not ensure that no employee was exposed to an airborne concentration of respirable crystalline silica in excess of 50 ?g/m3, calculated as an 8-hour TWA:  a) Stone Cutting Area: On or about March 5, 2026, the employer exposed employees to health hazards associated with silica, in that a stone grinder employee tasked to shape granite slabs was exposed to Respirable Crystalline Silica at 69.8 µg/m3 of 8-hour TWA . This level exceeded the Permissible Exposure Limit for RCS (50 µg/m3). The exposure was derived from a sample collected for a 246-minute sampling period. Exposure calculations included a zero increment for 234 minutes not sampled.
Recent events (1)
  • — Z (S) $3972

1910.1053 D03 I

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 10, 2026
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR  1910.1053(d)(3)(i): The employer did not perform initial monitoring to assess the 8-hour TWA exposure for each employee on the basis of one or more personal breathing zone air samples that reflect the exposures of employees on each shift, for each job classification, in each work area:  a) Stone grinding area: On or about March 5, 2026, the employer exposed employees to health hazards associated with silica, in that the employer did not ensure that initial monitoring was performed for employees conducting stone cutting activities when an employee was exposed to Respirable Crystalline Silica at 69.8 µg/m3 of an 8-hour TWA. This level exceeded the Permissible Exposure Limit for RCS (50 µg/m3). The exposure was derived from a sample collected for a 246-minute sampling period. Exposure calculations included a zero increment for 234 minutes not sampled.
Recent events (1)
  • — Z (S) $0

1910.1053 F01

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 10, 2026
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR  1910.1053(f)(1): The employer did not use engineering and work practice controls to reduce and maintain employee exposure to respirable crystalline silica to or below the PEL, unless the employer can demonstrate that such controls are not feasible:  a) Stone Grinding Area: On or about March 5, 2026, the employer exposed employees to health hazards associated with silica, in that, the employer failed to ensure adequate engineering and work practice controls provided to reduce employees exposure to respirable crystalline silica at or below the PEL. Stone grinder tasked to shape granite slabs were exposed to Respirable Crystalline Silica at 68.9 ?g/m3 of 8-hour TWA. This level exceeded the Permissible Exposure Limit for RCS (50 ?g/m3). The exposure was derived from a sample collected for a 246-minute sampling period. Exposure calculations included a zero increment for 234 minutes not sampled.
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348764523.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.