Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

MILFORD, CT —

OSHA Inspection: CADCOM INC

Planned inspection · Safety discipline

At a glance

On , OSHA opened a planned safety inspection of CADCOM INC in 110 RATON DRIVE, MILFORD, CT 06461 (NAICS 332721). OSHA activity number 348778192.

Watch Cadcom INC — free Get an email when a new federal OSHA severe-injury report for Cadcom INC is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
CADCOM INC
Site address
110 RATON DRIVE
City
MILFORD
State
CT
ZIP
06461
Mailing
110 RATON DRIVE, MILFORD, CT 06461

What kind of inspection was it?

Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Last modified
Data loaded

Establishment context

NAICS code
332721
Employees
13
Ownership type
A

Citations

3 citations on file for this inspection.

1910.147 C01

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $1929.00 · Current $1350.00 Reduced

General-duty citation text

29 CFR  1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  WORKSHOP/110 RATON DRIVE, MILFORD, CT, 06461:  On/or about March 2, 2026, and times prior to, the employer did not establish a hazardous energy control lockout/tagout program for the employees on the machinery such as but not limited to the CNC lathes and mills.  ABATED DURING THE INSPECTION
Recent events (2)
  • — I (S) $1350.3
  • — Z (S) $1929

1910.147 C04 I

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  WORKSHOP/110 RATON DRIVE, MILFORD, CT, 06461:  On/or about March 2, 2026, and times prior to, the employer did not establish hazardous energy control lockout/tagout energy control procedures for the employees on the machinery such as but not limited to the CNC lathes and mills.  ABATED DURING THE INSPECTION
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 A01

Serious Gravity 5 2 instances 2 exposed
Issued
Penalty
Initial $1929.00 · Current $1350.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  WORKSHOP/110 RATON DRIVE, MILFORD, CT, 06461: On/or about March 2, 2026, and times prior to, the employer did not ensure the rotating collets on the Hardinge lathes were guarded.  ABATED DURING THE INSPECTION.
Recent events (2)
  • — I (S) $1350.3
  • — Z (S) $1929

More inspections at CADCOM INC

View CADCOM INC's full OSHA safety record →

More inspections in this industry (NAICS 332721)

More inspections in CT

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348778192.