Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: JTM CONSTRUCTION, LLC

Unprogrammed Other inspection · Health discipline

On , OSHA opened an unprogrammed Other health inspection of JTM CONSTRUCTION, LLC in 7212 LARGE AVE, MANVEL, TX 77578 (NAICS 237110). OSHA activity number 348790155.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch JTM Construction, LLC — free Get an email when a new federal OSHA severe-injury report for JTM Construction, LLC is published. One employer, no account, unsubscribe in one click.
Site address
7212 LARGE AVE
City
MANVEL
State
TX
ZIP
77578
Mailing
2709 COTTONWOOD SCHOOL RD., ROSENBERG, TX 77471
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
237110
Employees
10
Ownership type
A

5 citations on file for this inspection.

1910.1200 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 23, 2026
Abate by
Apr 16, 2026
Penalty
Initial $6,620 · Current $3,310 Reduced

Hazardous substances 9010

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met (Construction Reference 1926.59):  a) On or about March 5, 2026, at the construction site, a written hazard communication program had not been implemented. Employees were exposed to hazardous substances, such as silica, when using SCP Mortar mix type S and Euclid NS Grout.
Recent events (2)
  • — I (S) $3310
  • — Z (S) $6620

1910.1200 G08

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 23, 2026
Abate by
Apr 16, 2026
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s) (Construction Reference 1926.59):  a) On or about March 5, 2026, at the construction site, where a safety data sheet (SDS) for SCP Mortar mix type S, a corrosive containing silica, was not maintained.  b) On or about March 5, 2026, at the construction site, where a safety data sheet (SDS) for Euclid NS Grout, a corrosive containing silica, was not maintained.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H03

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 23, 2026
Abate by
Apr 16, 2026
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(h)(3): The employee training did not include the requirements of 29 CFR 1910.1200(h)(3)(i) through (h)(3)(iv):   a) On or about March 5, 2026, at the construction site, employees were not provided effective training that included the details of the hazard communication program, which consisted of appropriate work practices and the safety data sheets. Employees use hazardous substances such as, but not limited to, SCP Mortar mix type S and Euclid NS Grout, a corrosive containing silica.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1153 C01

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Mar 23, 2026
Abate by
Apr 16, 2026
Penalty
Initial $6,620 · Current $0 Reduced

Hazardous substances 9000

29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1:  a) On or about March 5, 2026, at the construction site, where a portable Stihl masonry saw was used to cut precast concrete products without an integrated water delivery system.
Recent events (2)
  • — I (S) $0
  • — Z (S) $6620

1926.1153 D02 I

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 23, 2026
Abate by
Apr 16, 2026
Penalty
Initial $0 · Current $3,310
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:  a) On or about March 5, 2026, at the construction site, where the employer did not assess the employees' exposure to respirable crystalline silica while the employees were cutting  precast concrete products using a portable Stihl masonry saw.
Recent events (2)
  • — I (S) $3310
  • — Z (S) $0

View JTM Construction, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348790155.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.