NACOGDOCHES, TX —
OSHA Inspection: AMERICAN TIMBER AND STEEL INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of AMERICAN TIMBER AND STEEL INC. in 8807 FM 2259, NACOGDOCHES, TX 75965 (NAICS 321113). OSHA activity number 348790213.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AMERICAN TIMBER AND STEEL INC.
- Site address
- 8807 FM 2259
- City
- NACOGDOCHES
- State
- TX
- ZIP
- 75965
- Mailing
- 4832 PLANK ROAD, NORWALK, OH 44857
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 11
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Apr 16, 2026
- Abate by
- May 12, 2026
- Penalty
- Initial $5,628 · Current $3,377 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about March 5, 2026, employees the changed blade of a horizontal band saw without utilizing energy control procedures.
Recent events (2)
- — I (S) $3376.8
- — Z (S) $5628
1910.147 D03
- Issued
- Apr 16, 2026
- Abate by
- May 12, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): On or about March 5, 2026, employees changed the blade of a horizontal band saw without isolating the energy source.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D04 I
- Issued
- Apr 16, 2026
- Abate by
- May 12, 2026
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: On or about March 5, 2026, employees changed the blade of a horizontal band saw without applying a lock on the energy control device.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B01
- Issued
- Apr 16, 2026
- Abate by
- May 12, 2026
- Penalty
- Initial $7,878 · Current $4,727 Reduced
General-duty citation text
29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees: a. On or about March 5, 2026, at the first set of band saws on the production line, employees used a saw that did not have an outer sheath covering the electrical wires entering the variable frequency drive controlling the saw's motor. b. On or about March 5, 2026, at the second set of band saws on the production line, employees used a saw that did not have an outer sheath covering the electrical wires entering the variable frequency drive controlling the saw's motor.
Recent events (2)
- — I (S) $4726.8
- — Z (S) $7878
More inspections in this industry (NAICS 321113)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348790213.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.