OSHA Inspection: SISSON'S BODY WORKS INC.

Issued

2026-06-09

Penalty

Initial $2563 · Current $1600 Reduced

General-duty citation text

29 CFR  1910.107(b)(5)(i):There were no visible gauges, audible alarms or pressure activated devices installed in paint spray booths to indicate or ensure that the required air speed was maintained.  a)  On or about 03/10/2026, in the Detail Area, the "Mini" spray booth did not have visible gauges, audible alarms or pressure activated devices installed to indicate or ensure the required air speed was maintained.  NO ABATEMENT CERTIFICATION REQUIRED

Issued

2026-06-09

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.107(b)(5)(iv):Space within the spray booth on the downstream and upstream sides of filters were not protected with approved automatic sprinklers:  a) On or about 03/10/2026, in the Detail Area, the "Mini" spray booth was not protected with approved fire suppression systems, exposing employees to explosion hazards.  NO ABATEMENT CERTIFICATION REQUIRED

Issued

2026-06-09

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.107(b)(9): A clear space of not less than 3 feet on all sides of a spray booth was not kept free from storage or combustible construction:  a) On or about 03/10/2026, in the Detail Area, the "Mini" spray booth did not have a clear space at least 3 feet on all sides. Parts and materials were stored against the exterior back wall, and the left side of the "Mini" spray booth was installed directly against the Parts Department wall, exposing employees to fire hazards.  NO ABATEMENT CERTIFICATION REQUIRED

Issued

2026-06-09

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.107(c)(6): Electrical wiring, motors, and other equipment outside of but within twenty (20) feet of any spray area, and not separated therefrom by partitions, did not otherwise conform to the provisions of subpart S of this part for Class I, Division 2 Hazardous Locations:  a)  On or about 03/10/2026, in the Detail Area, on top of the "Mini" spray booth there is a standard junction box and standard wiring for the lights of the spray booth which are not rated for Class I, Division 2, creating a potential fire hazard.   NO ABATEMENT CERTIFICATION REQUIRED

Issued

2026-06-09

Penalty

Initial $1809 · Current $1250 Reduced

General-duty citation text

29 CFR  1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:  a) On or about 03/25/2026, in the Paint Booth Area, the employer required employees to wear half-mask respirators with OV/P100 cartridges when painting or using solvents and did not establish a written respiratory program with worksite specific procedures for: selecting respirators for use in the workplace, medical evaluations of employees required to use respirators and procedures for regularly evaluating the effectiveness of the program.  NO ABATEMENT CERTIFICATION REQUIRED

Issued

2026-06-09

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  a) On or about 03/25/2026, in the Paint Booth Area, the employer required employees to wear half-mask respirators with OV/P100 cartridges when painting or using solvents and the employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator, exposing employees to respiratory hazards.  NO ABATEMENT CERTIFICATION REQUIRED

Issued

2026-06-09

Penalty

Initial $339 · Current $0 Reduced

General-duty citation text

29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical:  a) On or about 03/10/2026, in the Mixing Room, wash cans filled with lacquer thinner did not have labels that included appropriate hazards of the chemical such as, but not limited to: flammability, physical and health hazard warnings.    NO ABATEMENT CERTIFICATION REQUIRED