Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CALIFORNIA SHEET METAL WORKS, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of CALIFORNIA SHEET METAL WORKS, INC. in VIEJAS CASINO & RESORT - 5000 WILLOWS ROAD WILLOWS TOWER, ALPINE, CA 91901 (NAICS 238390). OSHA activity number 348826033.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch California Sheet Metal Works, INC. — free Get an email when a new federal OSHA severe-injury report for California Sheet Metal Works, INC. is published. One employer, no account, unsubscribe in one click.
Site address
VIEJAS CASINO & RESORT - 5000 WILLOWS ROAD WILLOWS TOWER
City
ALPINE
State
CA
ZIP
91901
Mailing
1020 N. MARSHALL AVE, EL CAJON, CA 92020
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Last modified
Data loaded
NAICS code
238390
Employees
4
Ownership type
A

3 citations on file for this inspection.

1926.501 B01

Other-than-serious Gravity 5 1 instance 2 exposed
Issued
Apr 29, 2026
Abate by
May 26, 2026
Penalty
Initial $9,045 · Current $8,141 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.  Willows Tower: On March 18, 2026, employee(s) walked across the top of a metal pergola to access a swing stage scaffold, that had an unprotected side or edge, and was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.
Recent events (2)
  • — I (O) $8140.5
  • — Z (S) $9045

1926.501 B04 I

Other-than-serious Gravity 5 1 instance 2 exposed
Issued
Apr 29, 2026
Abate by
May 26, 2026
Penalty
Initial $0 · Current $0
29 CFR 1926.501(b)(4)(i): Each employee on walking/working surfaces was not protected from falling through holes (including skylights), more than six feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes.  Willows Tower: On March 18, 2026, employee(s) walked across the top of a metal pergola to access a swing stage scaffold, which had metal slats that were 12 inches apart. The pergola did not have covers to protect employee(s) from falling through openings and/or keep their balance.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1926.1053 B01

Other-than-serious Gravity 5 1 instance 2 exposed
Issued
Apr 29, 2026
Abate by
May 26, 2026
Penalty
Initial $0 · Current $0
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:  Willows Tower: On March 18, 2026, employee(s) used a Werner 16 foot ladder, to climb on top of a pergola approximately 10 feet above the ground. The Werner 16-foot ladder was not extended 3 feet above the upper landing surface to which the ladder was used to gain access.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

View California Sheet Metal Works, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348826033.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.