OSHA Inspection: STELLAR PRECISION COMPONENTS, LTD.

Issued

2026-05-29

Abate by

2026-06-25

Penalty

Initial $3972 · Current $3972

General-duty citation text

29 CFR  1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:  a)  At the facility, on or about May 7, 2026 - A written respiratory protection program was not established and implemented when employees were required to wear a respirator.  Employees were required to wear a 3M half-mask respirator when operating the blasting cabinet.

Issued

2026-05-29

Abate by

2026-06-25

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  a)  At the facility on or about May 7, 2026 - Medical evaluations were not provided to employees to determine their ability to use a respirator.  Employees are required to wear a  3M half-mask respirator when using the blasting cabinet.

Issued

2026-05-29

Abate by

2026-06-25

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator:   a)  At the facility, on or about May 7, 2026 -  Employees were not provided with a qualitative fit test (QLFT) or quantitative fit test (QNFT) prior to donning a tight-fitting respirator.  Employees were required to wear a 3M half-mask respirator when using the blasting cabinet.

Issued

2026-05-29

Abate by

2026-06-25

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.134(k): The employer did not provide effective training which did not occur annually and/or more often if necessary:  a)  At the facility, on or about May 7, 2026 - Employees were not provided with effective respiratory protection training when required to wear a respirator.  Employees were required to wear a 3M half-mask respirator when operating the blasting cabinet.