Houston, TX —
OSHA Injury Report: Baker Hughes - Emmott
Injury · Job transfer or restriction
At a glance
On , an injury at Baker Hughes - Emmott in Houston, TX 77040 resulted in job transfer or restriction. Employee was manufacturing in oil and gas field-type drilling machinery and equipment (except offshore floating platforms) manufacturing.
Where did this happen?
- Establishment
- Baker Hughes - Emmott
- Street
- 9100 Emmott Road
- City
- Houston
- State
- TX
- ZIP
- 77040
- On-site location
- Machine shop
What was the outcome?
- Outcome
- Job transfer or restriction (code 3)
- Type
- Injury (code 1)
- Days restricted or transferred
- 19
Before the incident
Tightening the jaws of the chuck on a piece of material that was just loaded into the machine.
What happened
The machinist turned the chuck manually with the wrench in order to tighten the next jaw. As the chuck rotated the machinist was unable to remove the wrench before it contacted the side of the machine. This caught the machinists hand between the wrench handle and side of the machine resulting in injury
Injury or illness
Employee 's left middle finger was caught between the wrench and the side of the machine while the chuck rotated.
Object or substance involved
The wrench and the side of the machine.
Summary line
On [REDACTED] at approximately [REDACTED] a machinist was tightening the jaws of the chuck on a piece of material that was just loaded into the machine. The machinist turned the chuck manually with the wrench in order to tighten the next jaw. As the
Employee and industry
- Job description
- Manufacturing
- SOC code
- 9999 — Uncoded
- NAICS code
- 333132 — Oil and gas field-type drilling machinery and equipment (except offshore floating platforms) manufacturing
- NAICS vintage
- 2022
- Avg employees
- 345
- Total hours worked
- 910853
- Establishment ID
- 1372489
- Employer case #
- 24_975
When (timing detail)
- Date of incident
- Shift started
- 6:00
- Time of incident
- 0:00
- Filing year
- 2024
- Submitted
- 28FEB2025:17:00:00
Source
Data from OSHA ITA Form 300/301 electronic submissions, filing year 2024. ITA Case Detail records are establishment-reported submissions, not OSHA inspections — no per-record IMIS deep link exists.