DANVILLE, IL —
OSHA Inspection: TEEPAK, INC.
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of TEEPAK, INC. in 915 NORTH MICHIGAN, DANVILLE, IL 61832 (NAICS 000000). OSHA activity number 100151331.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TEEPAK, INC.
- Site address
- 915 NORTH MICHIGAN
- City
- DANVILLE
- State
- IL
- ZIP
- 61832
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3089
- Employees
- 875
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- Jun 3, 1987
- Abate by
- Jun 8, 1988
- Penalty
- Initial $560 · Current $280 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The %% employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: The hazards of toxic and flammable vapors as the employer did not implement feasible and accepted engineering control measures on the continuous viscose processing machines which were designed to monitor and/or prevent atmospheric contamination by hazardous concentrations of carbon disulfide, hydrogen sulfide, and/or ammonia vapors during the manufacture of synthetic sausage casings. Among other methods, one feasible and acceptable abatement method to correct this hazard is: 1) Install high-level alarms and interlocks for shutdown of the viscose processing machines to prevent tank liquid levels from spilling into the side-draw exhaust systems and/or overflowing the tanks, thus rendering the ventilation systems ineffective. 2) Install high-temperature alarms and interlocks for shutdown of the viscose processing machines to prevent tank liquid temperatures from exceeding established safe operating limits, resulting in increased vapor production overburdening the local exhaust systems beyond their operating capacities. 3) Install continuous ambient air measurement instruments to monitor levels of carbon disulfide, hydrogen sulfide, and ammonia at strategic locations in the vicinity ofl the exhuaust systems of the continuous viscose processing machines to assure ventilation rates are sufficient to keep airborne levels below OSHA permissible exposure limits under all manufacturing conditions. These monitors shall incorporate audible alarms and interlocks for process shutdown should airborne levels exceed these limits.
Recent events (2)
- — F (S) $280.00
- — Z (S) $560.00
1910.23 C03
- Issued
- Apr 3, 1987
- Abate by
- Apr 8, 1987
- Penalty
- Initial $400 · Current $400
1910.94 D08 I
- Issued
- Apr 3, 1987
- Abate by
- Apr 8, 1988
- Penalty
- Initial $480 · Current $480
Recent events (2)
- — F (S) $480.00
- — Z (S) $480.00
1910.106 E06 I
- Issued
- Apr 3, 1987
- Abate by
- Apr 8, 1987
- Penalty
- Initial $640 · Current $320 Reduced
Recent events (2)
- — F (O) $320.00
- — Z (S) $640.00
1910.307 B
- Issued
- Apr 3, 1987
- Abate by
- Apr 8, 1988
- Penalty
- Initial $560 · Current $280 Reduced
Recent events (2)
- — F (S) $280.00
- — Z (S) $560.00
1910.132 A
- Issued
- Apr 3, 1987
- Abate by
- May 7, 1987
1910.1200 D06
- Issued
- Apr 3, 1987
- Abate by
- Apr 22, 1987
1910.1200 G02 IV
- Issued
- Apr 3, 1987
- Abate by
- Apr 22, 1987
1910.1200 G02 XII
- Issued
- Apr 3, 1987
- Abate by
- Apr 22, 1987
1910.1200 G03
- Issued
- Apr 3, 1987
- Abate by
- Apr 22, 1987
More inspections at Teepak, INC.
View Teepak, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 100151331.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.