LYONS, NY ·
OSHA Inspection: AGWAY INC.
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of AGWAY INC. in COLE RD. LYONS FERTILIZER PLANT, LYONS, NY 14489 (NAICS 000000). OSHA activity number 100207364.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AGWAY INC.
- Site address
- COLE RD. LYONS FERTILIZER PLANT
- City
- LYONS
- State
- NY
- ZIP
- 14489
- Mailing
- P.O. BOX 40, LYONS, NY 14489
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2875
- Employees
- 18
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
37 citations on file for this inspection.
5(a)(1)
- Issued
- May 20, 1987
- Abate by
- May 23, 1987
- Penalty
- Initial $810 · Current $450 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) The hazards of being crushed or buried by a cave-in while drilling, charging and loading blast holes in the lower area of a twenty-two (22) foot high pile of solidified ammonium sulfate in the main plant, bin #8 on 12/16/86. One feasible and acceptable abatement method among others, to correct this hazard is to use a battering ram type device fifteen (15) feet to twenty (20) feet in length attached to the scoop or bucket of a front- end loader to ram the pile, at different levels and loosen the solidified material while keeping the operator of the front-end loader at safe distance from collapsing materials.
Recent events (2)
- · I (S) $450.00
- · Z (S) $810.00
1910.23 C01
- Issued
- Apr 10, 1987
- Abate by
- May 12, 1987
- Penalty
- Initial $300 · Current $200 Reduced
Recent events (2)
- · I (S) $200.00
- · Z (S) $300.00
1910.109 E04 VIII
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
- Penalty
- Initial $360 · Current $180 Reduced
Recent events (2)
- · I (S) $180.00
- · Z (S) $360.00
1910.111 B10 II
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
- Penalty
- Initial $360 · Current $180 Reduced
Recent events (2)
- · I (S) $180.00
- · Z (S) $360.00
1910.134 E05
- Issued
- Apr 10, 1987
- Abate by
- Jun 30, 1987
Recent events (2)
- · I (S)
- · Z (S)
1910.134 F02 II
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
1910.134 F02 III
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
1910.134 F02 IV
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
1910.212 A01
- Issued
- Apr 10, 1987
- Abate by
- Apr 27, 1987
- Penalty
- Initial $360 · Current $240 Reduced
Recent events (2)
- · I (S) $240.00
- · Z (S) $360.00
1910.212 A05
- Issued
- Apr 10, 1987
- Abate by
- Apr 27, 1987
- Penalty
- Initial $180 · Current $180
1910.304 F04
- Issued
- Apr 10, 1987
- Abate by
- Apr 27, 1987
- Penalty
- Initial $360 · Current $170 Reduced
Recent events (2)
- · I (S) $170.00
- · Z (S) $360.00
1910.22 B01
- Issued
- Apr 10, 1987
- Abate by
- Apr 27, 1987
1910.23 A02
- Issued
- Apr 10, 1987
- Abate by
- Apr 27, 1987
1910.23 A03
- Issued
- Apr 10, 1987
- Abate by
- May 12, 1987
1910.23 E03 IV
- Issued
- Apr 10, 1987
- Abate by
- May 12, 1987
1910.24 B
- Issued
- Apr 10, 1987
- Abate by
- Apr 27, 1987
1910.24 F
- Issued
- Apr 10, 1987
- Abate by
- May 12, 1987
1910.24 H
- Issued
- Apr 10, 1987
- Abate by
- May 12, 1987
1910.27 F
- Issued
- Apr 10, 1987
- Abate by
- Apr 27, 1987
1910.106 D02 I
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
1910.106 E02 IVD
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
1910.106 G01 IE
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
1910.108 C05
- Issued
- Apr 10, 1987
- Abate by
- Apr 27, 1987
1910.111 C07
- Issued
- Apr 10, 1987
- Abate by
- May 12, 1987
1910.151 C
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
1910.178 A06
- Issued
- Apr 10, 1987
- Abate by
- May 12, 1987
1910.178 P01
- Issued
- Apr 10, 1987
- Abate by
- May 12, 1987
1910.219 F03
- Issued
- Apr 10, 1987
- Abate by
- May 12, 1987
1910.242 B
- Issued
- Apr 10, 1987
- Abate by
- Apr 27, 1987
1910.243 C01
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
1910.252 A02 IIB
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
1910.303 B01
- Issued
- Apr 10, 1987
- Abate by
- Apr 27, 1987
1910.303 F
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
1910.304 A02
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
1910.304 F04
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
1910.1200 F04 II
- Issued
- Apr 10, 1987
- Abate by
- Apr 13, 1987
1910.1200 G01
- Issued
- Apr 10, 1987
- Abate by
- May 12, 1987
More inspections at Agway INC.
View Agway INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 100207364.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.