MARSHFIELD, WI —
OSHA Inspection: STAINLESS AND REPAIR INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of STAINLESS AND REPAIR INC. in 207 B WEST 2ND STREET, MARSHFIELD, WI 54449 (NAICS 000000). OSHA activity number 102507738.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STAINLESS AND REPAIR INC.
- Site address
- 207 B WEST 2ND STREET
- City
- MARSHFIELD
- State
- WI
- ZIP
- 54449
- Mailing
- P. O. BOX 795, MARSHFIELD, WI 54449
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3449
- Employees
- 12
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
9 citations on file for this inspection.
5(a)(1)
- Issued
- May 20, 1992
- Abate by
- Jul 15, 1992
- Penalty
- Initial $750 · Current $345 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Employees entering used stainless steel dairy tanks for repair and occasionally to clean, are exposed to potentially oxygen deficient atmosphere. Among other methods, one feasible and acceptable abatement method to correct these hazards is to establish and enforce an adequate plant confined space entry procedures such as that stipulated by ANSI Z117.1-1989. American National Standard for Working in Tanks and Other Confined Spaces. Essential elements of this confined space entry procedure would include: 1. Hazard Identification - Identify and evaluate each hazard of the permit spaces including determination of severity. 2. Hazard Control - Establish and implement the means, procedures and practices by which the permit spaces can be entered safely. 3. Permit System - Establish a written permit system for the proper preparation, issuance and implementation of entry permits. 4. Employee Information - Signs shall be posted near permit spaces to notify employees that hazards may be present and that only authorized entrants may enter the permit spaces. 5. Prevention of unauthorized entry - Prevent unauthorized employee entry through such measures as training or by posting signs and barriers as necessary. 6. Employee Training - Train employees so that attendents authorized entrants and personnel authorizing or in charge of entry can work safely in and around the permit space. 7. Equipment - Provide, maintain and ensure the proper use of the equipment necessary for safe entry, including testing, monitoring, communication and personal protective equipment. 8. Rescue - Ensure that the procedures and equipment necessary to rescue entrants from permit spaces are implemented and provided. 9. Protection from External Hazards - Ensure that all pedestrian, vehicle or other barriers necessary to protect entrants from external hazards are provided. 10. Duty to Other Employers - Ensure that when an employer such as a con- tractor, plans to send employees into a permit space which is under the control of another employer (host employer), the host employer provides the contractor with all available information on permit space hazards; on efforts to comply with this standard; and on any other workplace hazards, safety rules and emergency procedures of which the contractor needs to be aware of.
Recent events (2)
- — I (S) $345.00
- — Z (S) $750.00
1910.252 B04 IV
- Issued
- May 20, 1992
- Abate by
- Jul 15, 1992
- Penalty
- Initial $750 · Current $345 Reduced
Recent events (2)
- — I (S) $345.00
- — Z (S) $750.00
1910.252 B04 IV
- Issued
- May 20, 1992
- Abate by
- Jul 15, 1992
Recent events (2)
- — I (S)
- — Z (S)
1910.1200 E01
- Issued
- May 20, 1992
- Abate by
- Jun 22, 1992
- Penalty
- Initial $450 · Current $150 Reduced
Recent events (2)
- — I (S) $150.00
- — Z (S) $450.00
1910.1200 G01
- Issued
- May 20, 1992
- Abate by
- Jun 22, 1992
- Penalty
- Initial $450 · Current $150 Reduced
Recent events (2)
- — I (S) $150.00
- — Z (S) $450.00
1910.1200 H
- Issued
- May 20, 1992
- Abate by
- Jun 22, 1992
- Penalty
- Initial $450 · Current $150 Reduced
Recent events (2)
- — I (S) $150.00
- — Z (S) $450.00
1903.2 A01
- Issued
- May 20, 1992
- Abate by
- May 25, 1992
1904.2 A
- Issued
- May 20, 1992
- Abate by
- Jun 22, 1992
1910.95 C01
- Issued
- May 20, 1992
- Abate by
- Oct 31, 1992
- Penalty
- Initial $300 · Current $120 Reduced
8111
Recent events (3)
- — P (O) $120.00
- — I (O) $120.00
- — Z (O) $300.00
More inspections at Stainless and Repair INC.
View Stainless and Repair INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 102507738.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.