ZANESVILLE, OH —
OSHA Inspection: THE OXFORD OIL COMPANY
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of THE OXFORD OIL COMPANY in UNITED WELL #J1 DILLION ROAD, ZANESVILLE, OH 43702 (NAICS 000000). OSHA activity number 103038105.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE OXFORD OIL COMPANY
- Site address
- UNITED WELL #J1 DILLION ROAD
- City
- ZANESVILLE
- State
- OH
- ZIP
- 43702
- Mailing
- P.O. BOX 2909, ZANESVILLE, OH 43702
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1381
- Employees
- 10
- Ownership type
- A
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 19, 1989
- Abate by
- Jan 2, 1990
- Penalty
- Initial $400 · Current $400
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not Furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) Rig #3, Richard Barnett unit well J1, employees were subject to the hazards of being struck by and severaly injured should a four inch inside diameter pressurized vibrator hose with an operating pressure of more than 200 psi gauge, become disconnected and whip about striking them. Among other methods, one feasible and acceptable abatement method to correct this hazard is to secure the hose using chains properly located and of sufficient strength to resist hose whipping should it become disconnected or broken, as referenced in paragraph B.14.3 of API-RP 54, "Recommended Practices For Occupational Safety and Health for Oil and Gas Well Drilling and Servicing Operations."
Recent events (2)
- — I (S) $400.00
- — Z (S) $400.00
1910.23 A08
- Issued
- Dec 19, 1989
- Abate by
- Dec 29, 1989
- Penalty
- Initial $400 · Current $280 Reduced
Recent events (2)
- — I (S) $280.00
- — Z (S) $400.00
1910.212 A01
- Issued
- Dec 19, 1989
- Abate by
- Jan 19, 1990
- Penalty
- Initial $700 · Current $490 Reduced
Recent events (2)
- — I (S) $490.00
- — Z (S) $700.00
1910.215 A04
- Issued
- Dec 19, 1989
- Abate by
- Jan 2, 1990
- Penalty
- Initial $300
Recent events (2)
- — I (O)
- — Z (S) $300.00
1910.215 B09
- Issued
- Dec 19, 1989
- Abate by
- Dec 29, 1989
Recent events (2)
- — I (O)
- — Z (S)
1910.1200 E01
- Issued
- Dec 19, 1989
- Abate by
- Jan 31, 1990
- Penalty
- Initial $500 · Current $500
Recent events (2)
- — I (S) $500.00
- — Z (S) $500.00
1910.1200 G01
- Issued
- Dec 19, 1989
- Abate by
- Jan 19, 1990
- Penalty
- Initial $500 · Current $500
Recent events (2)
- — I (S) $500.00
- — Z (S) $500.00
1910.1200 H
- Issued
- Dec 19, 1989
- Abate by
- Jan 31, 1990
- Penalty
- Initial $500 · Current $500
Recent events (2)
- — I (S) $500.00
- — Z (S) $500.00
1910.1200 E01
- Issued
- Dec 19, 1989
- Abate by
- Jan 31, 1990
- Penalty
- Current $500
Recent events (1)
- — Q $500.00
1910.1200 G01
- Issued
- Dec 19, 1989
- Abate by
- Jan 19, 1990
1910.1200 H
- Issued
- Dec 19, 1989
- Abate by
- Jan 31, 1990
5(a)(1)
- Issued
- Dec 19, 1989
- Abate by
- Dec 22, 1989
- Penalty
- Initial $9,000
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a. Rig #3, Richard Barnett unit well J1, employees were subject to the hazards of being struck by and severly injured should a four inch inside diameter pressurized vibrator hose with an operating pressure of more than 200 psi gauge, become disconnected and whip about striking them. Among other methods, one feasible and acceptable abatement method to correct this hazard is to secure the hose using chains properly located and of sufficient strength to resist hose whipping should it become disconnected or broken, as referenced in paragraph 8.14.3 of API-RP 54, "Recommended Practices For Occupational Safety and Health For OIl and Gas Well Drilling and Servicing Operations."
Recent events (2)
- — I (S)
- — Z (W) $9000.00
More inspections at The Oxford OIL Company
View The Oxford OIL Company's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 103038105.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.