OSHA Inspection: JELD-WEN HAWKINS WINDOW DIVISION

Issued

Jul 18, 2000

Abate by

Aug 18, 2000

Penalty

Initial $900 · Current $540 Reduced

Issued

Jan 20, 2000

Abate by

Jan 26, 2000

Penalty

Initial $2,250 · Current $2,250

Issued

Jan 20, 2000

Abate by

Jan 26, 2000

Issued

Jan 20, 2000

Abate by

Jan 26, 2000

Issued

Jan 20, 2000

Abate by

Jan 26, 2000

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Penalty

Initial $1,800 · Current $900 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to:
Being struck by a load should the overhead hoist, rail or building
structure fail;
(a)In the shipping/receiving area; overhead hoist without a load rating
capacity for
the rail or routine inspections.
(b)In the specialty department by the glass glazing area; overhead hoist
without a
load rating capacity for the rail or routine inspection.  Glass panels
lifted into
position with the hoist and a glass vacuum lifter.
(c)60 Series Patio Doors in building #5; overhead hoist without a load
rating
capacity for the rail, no routine inspections and the "U" bolts on the
wire rope
(below the hook) were installed incorrectly.
Among other methods, feasible and acceptable methods to correct these
hazards are:
1.Determine the load rating of the supporting structure, ensuring that it
is at least
equal to that of the hoists, or provide a structure with such a rating, as
per ANSI
B30.16-1.3.2.
2.Perform frequent inspections at daily to monthly intervals and periodic
inspections
at monthly to yearly intervals as per ANSI B30.16-2.1., 2.1.2., 2.1.3., or
the
owner's manual.  Written, dated and signed inspection reports should be
maintained at time intervals specified in ANSI B30.16-2.1.1(b)(2).
3.Insure that below-the-hook lifting devices (vacuum lifting devices) are
designed,
installed and maintained in proper condition with trained operators.
Perform
frequent inspections at daily to monthly intervals and periodic
inspections at
monthly to yearly intervals per ANSI B30.20-2.1., 2.2., 2.3., and 2.4.
Records
of periodic inspections shall be maintained, or the device marked to
indicate the
inspection was performed per ANSI B30.20.ed

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Penalty

Initial $1,800 · Current $900 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to the hazard of accidental activation:
(a)screening dept. in building #2; screen cutting saw had a metal bar
covering the
activation button/switch which increased the size and sensitivity of the
button
which could result in an accidental activation.
(b)door extrusion in building #6; the foot pedal for the Sampson Mitre saw
was not
mounted or guarded from accidental activation.
Among other methods, feasible and acceptable methods to correct these
hazards are:
1.Provide protection for activation means such as but not limited to: two
hand
controls, additional point of operation guarding, treadle protection,
mounting,
and/or increase distance of the activation means from the point of
operation.

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Penalty

Initial $1,350 · Current $1,350

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Penalty

Initial $1,350 · Current $1,350

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Penalty

Initial $1,800 · Current $1,800

Issued

Sep 30, 1998

Abate by

Nov 18, 1998

Issued

Sep 30, 1998

Abate by

Nov 18, 1998

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Penalty

Current $900

Issued

Sep 30, 1998

Abate by

Oct 6, 1998

Issued

Sep 30, 1998

Abate by

Nov 18, 1998

Penalty

Initial $1,800 · Current $1,800

Issued

Sep 30, 1998

Abate by

Nov 18, 1998

Issued

Sep 30, 1998

Abate by

Nov 18, 1998

Penalty

Initial $2,250 · Current $2,250

Issued

Sep 30, 1998

Abate by

Nov 18, 1998

Issued

Sep 30, 1998

Abate by

Oct 6, 1998

Issued

Sep 30, 1998

Abate by

Oct 6, 1998

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Penalty

Initial $2,250 · Current $1,500 Reduced

Issued

Sep 30, 1998

Abate by

Oct 18, 1998

Penalty

Initial $1,800 · Current $1,800

Issued

Sep 30, 1998

Abate by

Oct 5, 1998

Issued

Sep 30, 1998

Abate by

Oct 6, 1998

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Penalty

Initial $1,800 · Current $1,800

Issued

Sep 30, 1998

Abate by

Oct 5, 1998

Penalty

Initial $1,800 · Current $1,800

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Penalty

Initial $1,350 · Current $1,350

Issued

Sep 30, 1998

Abate by

Nov 18, 1998

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Penalty

Initial $1,800 · Current $1,000 Reduced

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Penalty

Initial $1,350

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Penalty

Current $1,350

Issued

Sep 30, 1998

Abate by

Oct 5, 1998

Penalty

Initial $1,800 · Current $1,800

Issued

Sep 30, 1998

Abate by

Oct 20, 1998

Issued

Sep 30, 1998

Abate by

Apr 30, 1998

Issued

Sep 30, 1998

Abate by

Oct 20, 1998

Penalty

Initial $49,500 · Current $5,000 Reduced

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Issued

Sep 30, 1998

Abate by

Oct 6, 1998

Issued

Sep 30, 1998

Abate by

Nov 18, 1998

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Issued

Sep 30, 1998

Abate by

Nov 18, 1998

Issued

Sep 30, 1998

Abate by

Oct 27, 1998

Issued

Sep 30, 1998

Abate by

Oct 6, 1998

Issued

Sep 30, 1998

Abate by

Oct 6, 1998

Issued

Sep 30, 1998

Abate by

Oct 6, 1998

Issued

Sep 30, 1998

Abate by

Apr 30, 1998