NAMPA, ID —
OSHA Inspection: IDAHO TRUST AND COMPONENT COMPANY
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of IDAHO TRUST AND COMPONENT COMPANY in 1102 FRANKLIN BLVD, NAMPA, ID 83687 (NAICS 000000). OSHA activity number 107025165.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- IDAHO TRUST AND COMPONENT COMPANY
- Site address
- 1102 FRANKLIN BLVD
- City
- NAMPA
- State
- ID
- ZIP
- 83687
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2439
- Employees
- 50
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
22 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 25, 1989
- Abate by
- Oct 5, 1989
- Penalty
- Initial $360 · Current $180 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The %% employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) A rotating blade on the componamatic saw during maintenance, repairs and adjustments. The exposure is, in part, the result of frequent failure of the power brake upon deactivation of the saw allowing the blade to rotate freely. The exposed employee either adjusts the rotating blade, or prior to making adjustments, stops the blade by applying pressure to the blade with a piece of wood. The employee is also exposed to the potential hazard of inadvertent activation of the saw during maintenance, repairs, and adjustments. b) Rotating blades on the economatic radial arm saw during maintenance, repairs and adjustments. The saw was not equipped with a braking device allowing the blades to rotate freely upon deactivation. Employees adjusting one blade, were working in close proximity to the other rotating blade. Employees are also exposed to the potential hazard of inadvertent activationof the saw during maintenance, repairs, and adjustments. c) Among other methods, some feasible and acceptable abatement methods to correct these hazards are: 1) Repair power brake on componamatic saw. 2) Fabricate and install a braking system on the economatic saw. 3) Develop and implement a lockout/tagout program, as stipulated by ANSI Z244.1-1982, Section 4 and 5, American National Standard of Minimum Safety Requirments For Lockout/Tagout of Energy Sources For Lockout/ Tagout of Energy Sources For Personnel Protection, to ensure that equipment is at a zero energy and movement state prior to maintenance repairs, and adjustments.
Recent events (2)
- — R (S) $180.00
- — Z (S) $360.00
1910.133 A01
- Issued
- Sep 25, 1989
- Abate by
- Sep 28, 1989
- Penalty
- Initial $240 · Current $120 Reduced
Recent events (2)
- — R (S) $120.00
- — Z (S) $240.00
1910.212 A02
- Issued
- Sep 25, 1989
- Abate by
- Oct 11, 1989
- Penalty
- Initial $240 · Current $120 Reduced
Recent events (2)
- — R (S) $120.00
- — Z (S) $240.00
1910.219 F03
- Issued
- Sep 25, 1989
- Abate by
- Oct 11, 1989
1910.212 A03 II
- Issued
- Sep 25, 1989
- Abate by
- Oct 5, 1989
- Penalty
- Initial $240 · Current $120 Reduced
Recent events (2)
- — R (S) $120.00
- — Z (S) $240.00
1910.213 H01
- Issued
- Sep 25, 1989
- Abate by
- Oct 5, 1989
- Penalty
- Initial $420 · Current $210 Reduced
Recent events (2)
- — R (S) $210.00
- — Z (S) $420.00
1910.219 C04 I
- Issued
- Sep 25, 1989
- Abate by
- Oct 11, 1989
- Penalty
- Initial $180 · Current $90 Reduced
Recent events (2)
- — R (S) $90.00
- — Z (S) $180.00
1910.219 D01
- Issued
- Sep 25, 1989
- Abate by
- Oct 11, 1989
- Penalty
- Initial $360 · Current $180 Reduced
Recent events (2)
- — R (S) $180.00
- — Z (S) $360.00
1910.219 E03 I
- Issued
- Sep 25, 1989
- Abate by
- Oct 11, 1989
1910.1200 E01
- Issued
- Sep 25, 1989
- Abate by
- Oct 26, 1989
- Penalty
- Initial $120 · Current $60 Reduced
Recent events (2)
- — R (S) $60.00
- — Z (S) $120.00
1910.1200 G01
- Issued
- Sep 25, 1989
- Abate by
- Oct 26, 1989
1910.1200 H
- Issued
- Sep 25, 1989
- Abate by
- Oct 26, 1989
1904.2 A
- Issued
- Sep 25, 1989
- Abate by
- Oct 26, 1989
- Penalty
- Initial $100 · Current $50 Reduced
Recent events (2)
- — R (O) $50.00
- — Z (O) $100.00
1904.5 A
- Issued
- Sep 25, 1989
- Abate by
- Oct 26, 1989
1904.5 B
- Issued
- Sep 25, 1989
- Abate by
- Oct 26, 1989
1904.5 C
- Issued
- Sep 25, 1989
- Abate by
- Oct 26, 1989
1910.101 B
- Issued
- Sep 25, 1989
- Abate by
- Sep 28, 1989
1910.215 A04
- Issued
- Sep 25, 1989
- Abate by
- Oct 11, 1989
1910.215 B09
- Issued
- Sep 25, 1989
- Abate by
- Oct 11, 1989
1910.303 F
- Issued
- Sep 25, 1989
- Abate by
- Oct 2, 1989
1910.303 G02 II
- Issued
- Sep 25, 1989
- Abate by
- Oct 11, 1989
1910.305 G02 III
- Issued
- Sep 25, 1989
- Abate by
- Oct 11, 1989
More inspections at Idaho Trust and Component Company
View Idaho Trust and Component Company's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 107025165.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.