NAKNEK, AK —
OSHA Inspection: NORTH COAST SEAFOOD PROCESSORS INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NORTH COAST SEAFOOD PROCESSORS INC in M/V POLAR QUEEN, NAKNEK, AK 99633 (NAICS 000000). OSHA activity number 107108235.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NORTH COAST SEAFOOD PROCESSORS INC
- Site address
- M/V POLAR QUEEN
- City
- NAKNEK
- State
- AK
- ZIP
- 99633
- Mailing
- P.O. BOX 70668, SEATTLE, WA 98107
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2092
- Employees
- 43
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 8, 1992
- Abate by
- Sep 11, 1992
- Penalty
- Initial $1,200 · Current $450 Reduced
General-duty citation text
The alleged violations below have been grouped because they involve similar or related hazards that may increase the potential for injury resulting from an accident. Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a recognized hazard of electrical shock and burns: (a) M/V Polar Queen: Employees working in the pipe room had occasion to work near a 110-volt outlet that has reversed polarity. This conditions exposed employees to electrical shock and burns if they came into contact with an ungrounded tool or electrical appliance using the outlet. Among other methods, one acceptable and feasible mean of abatement would be to properly install the outlet in ac- cordance with National Electrical Code standards.
Recent events (2)
- — I (S) $450.00
- — Z (S) $1200.00
5(a)(1)
- Issued
- Sep 8, 1992
- Abate by
- Sep 11, 1992
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a recognized hazard of electrical shock and burns: (a) M/V Polar Queen: Employees working in the pipe hall had occasion to work near electrical duplex outlet boxes that had access knockouts missing on the side of the boxes. This condition exposed employees to possible contact with live conductors inside the boxes. Among other methods, one feasible and acceptable method of abatement would be to install new knockout plugs in the holes.
Recent events (2)
- — I (S)
- — Z (S)
5(a)(1)
- Issued
- Sep 8, 1992
- Abate by
- Sep 11, 1992
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a recognized hazard of electrical shock and burns: (a) M/V Polar Queen: Employees working in the process room had occasion to work near an electrical duplex outlet box that had no cover over live electrical conductors. This condition exposed employees to possible contact with live conductors inside the box. Among other methods, one feasible and acceptable method of abatement would be to replace the cover.
Recent events (2)
- — I (S)
- — Z (S)
1918.51 B
- Issued
- Sep 8, 1992
- Abate by
- Sep 11, 1992
- Penalty
- Initial $1,200 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $1200.00
More inspections at North Coast Seafood Processors INC
View North Coast Seafood Processors INC's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in AK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 107108235.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.