NAKNEK, AK —
OSHA Inspection: YAK INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of YAK INC in M/V YARDARM KNOT-NAKNEK, NAKNEK, AK 99633 (NAICS 000000). OSHA activity number 109430116.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- YAK INC
- Site address
- M/V YARDARM KNOT-NAKNEK
- City
- NAKNEK
- State
- AK
- ZIP
- 99633
- Mailing
- 123 NW 36TH STREET, SUITE 230, SEATTLE, WA 98107
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2092
- Employees
- 163
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 4, 1994
- Abate by
- Aug 8, 1994
- Penalty
- Initial $1,625 · Current $894 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a recognized hazard of electrical shock and burns: (a)M/V Yardarm Knot: Employees working in the engine room electrical cage were exposed to a tripping hazard near live electrical conductors due to an oil heater being stored on the floor of the work space. Among other methods, one feasible and acceptable method of abatement would be to remove the heater and ban storage in the area.
Recent events (2)
- — I (S) $893.75
- — Z (S) $1625.00
5(a)(1)
- Issued
- Aug 4, 1994
- Abate by
- Aug 8, 1994
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a recognized hazard of electrical shock and burns: (a)M/V Yardarm Knot: Employees working in the engine room electrical cage had occasion to work near bare electrical conductors in a space that was not adequately illuminated due to the light bulbs being burned out. Among other methods, one feasible and acceptable method of abatement would be to replace the bulbs.
Recent events (2)
- — I (S)
- — Z (S)
5(a)(1)
- Issued
- Aug 4, 1994
- Abate by
- Aug 12, 1994
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a recognized hazard of electrical shock and burns: (a)M/V Yardarm Knot: In the engine room, the small pump electrical panel did not have the overcurrent (breakers) devices identified as to what lines or equipment were served by the devices. Among other methods, one feasible and acceptable method of abatement would be to identify and index each circuit.
Recent events (2)
- — I (S)
- — Z (S)
5(a)(1)
- Issued
- Aug 4, 1994
- Abate by
- Aug 8, 1994
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a recognized hazard of electrical shock and burns: (a)M/V Yardarm Knot: In the lower deck cross companion way at the old laundry site, a 110-volt duplex outlet had an open neutral wire/conductor and the cover plate was loose, leaving an open gap on the side of the junction box. Among other methods, one feasible and acceptable method of abatement would be to rewire the outlet feeder conductors and replace the corner screws on the outlet cover plate.
Recent events (2)
- — I (S)
- — Z (S)
1910.23 A08 II
- Issued
- Aug 4, 1994
- Abate by
- Aug 8, 1994
- Penalty
- Initial $1,300 · Current $715 Reduced
Recent events (2)
- — I (S) $715.00
- — Z (S) $1300.00
More inspections at YAK INC
View YAK INC's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in AK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 109430116.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.