DUTCH HARBOR, AK ·
OSHA Inspection: ARCTIC ALASKA FISHERIES CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ARCTIC ALASKA FISHERIES CORPORATION in M/V GLACIER ENTERPRISE, OSI DOCK, DUTCH HARBOR, AK 99692 (NAICS 000000). OSHA activity number 109431197.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ARCTIC ALASKA FISHERIES CORPORATION
- Site address
- M/V GLACIER ENTERPRISE, OSI DOCK
- City
- DUTCH HARBOR
- State
- AK
- ZIP
- 99692
- Mailing
- FISHERMEN'S CENTER, P.O. BOX 79021, SEATTLE, WA 98119
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2092
- Employees
- 14
- Ownership type
- A
- Industry flags
- Maritime safety.
Citations
7 citations on file for this inspection.
5(a)(1)
- Issued
- May 21, 1993
- Abate by
- May 29, 1993
- Penalty
- Initial $1,700 · Current $1,700
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a recognized hazard of electrical shock and burns: (a) M/V Glacier Enterprise: Employees working in the engine room had occasion to work near an electrical control box on a sandair compressor that did not have the electrical conductors installed in a strain relief or bushings where the conductors entered the control box. This condition exposed employees to possible contact with the conductors should the conductors be pulled from the contact terminals or become abraded. Among other methods, one feasible and acceptable method of abatement would be to install the conductors through the proper strain relief or bushings. (b) M/V Glacier Enterprise: Employees working in the engine room had occasion to work on or near an electric motor that did not have the strain relief or bushing installed on the conductors entering the motor. This condition exposed employees to possible contact with live electrical conductors should the wires be pulled from motor terminals. Among other methods, one feasible and acceptable method of abatement would be to install the conductors in proper strain relief and bushings.
Recent events (2)
- · I (S) $1700.00
- · Z (S) $1700.00
1910.215 A04
- Issued
- May 21, 1993
- Abate by
- Jun 8, 1993
- Penalty
- Initial $1,275 · Current $1,275
Recent events (2)
- · I (S) $1275.00
- · Z (S) $1275.00
1910.1030 C01 I
- Issued
- May 21, 1993
- Abate by
- Jun 23, 1993
- Penalty
- Initial $2,125 · Current $1,000 Reduced
Recent events (2)
- · I (O) $1000.00
- · Z (S) $2125.00
5(a)(1)
- Issued
- May 21, 1993
- Abate by
- May 29, 1993
- Penalty
- Initial $12,500 · Current $2,500 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a recognized hazard of electrical shock or burns: (a) M/V Glacier Enterprise: Employees working or walking in engine room had occasion to be exposed to an electrical breaker panel box that did not have unused breaker openings effectively closed or covered. This condition exposed employees to live electrical conductors should the employee enter the panel box to access the breakers. Among other methods, one feasible and acceptable method of abatement would be to install covers over the openings. Arctic Alaska Fisheries Corporation was previously cited for a violation of this Occupational Safety and Health Standard or its equivalent standard which was contained in OSHA Inspection Number 107107567, Citation Number 1, Item Number 2, issued on 6/04/90.
Recent events (2)
- · I (S) $2500.00
- · Z (R) $12500.00
1910.215 B09
- Issued
- May 21, 1993
- Abate by
- Jun 8, 1993
- Penalty
- Initial $7,500 · Current $1,500 Reduced
Recent events (2)
- · I (R) $1500.00
- · Z (R) $7500.00
1918.12 A
- Issued
- May 21, 1993
- Abate by
- Jun 23, 1993
- Penalty
- Initial $25,000 · Current $12,500 Reduced
Recent events (2)
- · I (R) $12500.00
- · Z (R) $25000.00
1904.5 C
- Issued
- May 21, 1993
- Abate by
- Jun 8, 1993
- Penalty
- Initial $850 · Current $850
Recent events (2)
- · I (O) $850.00
- · Z (O) $850.00
More inspections at Arctic Alaska Fisheries Corporation
View Arctic Alaska Fisheries Corporation's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in AK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 109431197.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.