Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,871Inspections Most recent open 2026-07-30 Last loaded 2026-08-02

OSHA Inspection: ARCTIC ALASKA FISHERIES CORPORATION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ARCTIC ALASKA FISHERIES CORPORATION in M/V HARVESTER ENTERPRISE, DUTCH HARBOR, AK 99692 (NAICS 000000). OSHA activity number 109433805.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Arctic Alaska Fisheries Corporation for free Get an email when a new federal OSHA severe-injury report for Arctic Alaska Fisheries Corporation is published. One employer, no account, unsubscribe in one click.
Site address
M/V HARVESTER ENTERPRISE
City
DUTCH HARBOR
State
AK
ZIP
99692
Mailing
P.O. BOX 79021, SEATTLE, WA 28119
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Data loaded
NAICS code
000000
SIC code (legacy)
2092
Employees
38
Ownership type
A

3 citations on file for this inspection.

5(a)(1)

Serious Gravity 05 1 instance 1 exposed
Issued
Apr 1, 1994
Abate by
Apr 5, 1994
Penalty
Initial $3,500 · Current $1,750 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to a recognized hazard of electrical shock or burns:
(a)M/V Harvester Enterprise:  Employees working with a Makita chop saw had
occasion to use a tool that had the ground contact broken off or removed
on the
power cord plug in.  This condition exposed employees to electrical shock
or
burns in the event contact was made and the employee became a source to
ground.
(b)M/V Harvester Enterprise:  Employees working with a Makita chop saw had
occasion to be exposed to a damaged power cord that had numerous breaks
and
cuts in the exterior insulation cover.  This condition exposed employees
to
personal injury in the event that electrical conductors were bared and
contact was
made by employees with live conductors.
Among other methods, one feasible and acceptable method of abatement would
be to replace the power cord.
Recent events (2)
  • · F (S) $1750.00
  • · Z (S) $3500.00

1910.157 C01

Deleted Serious Gravity 01 1 instance 2 exposed
Issued
Apr 1, 1994
Abate by
Apr 6, 1994
Penalty
Initial $1,500 · Current $1,500
Recent events (2)
  • · F (S) $1500.00
  • · Z (S) $1500.00

5(a)(1)

Repeat Gravity 03 1 instance 38 exposed
Issued
Apr 1, 1994
Abate by
Apr 19, 1994
Penalty
Initial $25,000 · Current $12,250 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to a recognized hazard of electrical shock or burns:
(a)M/V Harvester Enterprise:  Employees working or walking in the galley
area had
occasion to be near an electrical panel breaker box that did not have the
unused
breaker openings effectively closed or covered.  This condition exposed
employees to live electrical conductors should the employee enter the
panel box
to access the breakers in an emergency.
Among other methods, one feasible and acceptable method of abatement would
be to install covers over the openings.
(b)M/V Harvester Enterprise:  Employees working or walking in the galley
area had
occasion to be near an electrical panel breaker box that did not have the
exposed
electrical conductors effectively protected or covered.  This condition
exposed
employees to live electrical conductors should an employee enter the
panel box
to access the breakers.
Among other methods, one feasible and acceptable method of abatement would
be to install a cover over the conductors.
Arctic Alaska Fisheries Corporation was previously cited for a violation
of this
Occupational Safety and Health Standard or its equivalent standard which
was
contained in OSHA Inspection Number 107107567, Citation Number 1, Item
Number 2, issued on 6/04/90.
Recent events (2)
  • · F (R) $12250.00
  • · Z (S) $25000.00

View Arctic Alaska Fisheries Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 109433805.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.