NEWARK, NY —
OSHA Inspection: SPINCO METAL PRODUCTS, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SPINCO METAL PRODUCTS, INC in 1 COUNTRY CLUB DRIVE, NEWARK, NY 14513 (NAICS 000000). OSHA activity number 109912139.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SPINCO METAL PRODUCTS, INC
- Site address
- 1 COUNTRY CLUB DRIVE
- City
- NEWARK
- State
- NY
- ZIP
- 14513
- Mailing
- PO BOX 231, NEWARK, NY 14513
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3498
- Employees
- 110
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
9 citations on file for this inspection.
5(a)(1)
- Issued
- Jun 18, 2002
- Abate by
- Jun 21, 2002
- Penalty
- Initial $825 · Current $536 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by the load: a)In the workplace, receiving and storage area, on or about 02-19-2002: Pendant controls of the overhead hoist were not clearly identified as to indicate their function as required by American National Standards Institute (ANSI) B30.16, para 16-1.1.2. Among other methods, one feasible and acceptable method of abatement to correct this hazard is to label the control buttons of the pendant control to indicate the direction of resultant motion.nt
Recent events (2)
- — I (S) $536.25
- — Z (S) $825.00
1910.101 B
- Issued
- Jun 18, 2002
- Abate by
- Jun 21, 2002
- Penalty
- Initial $825 · Current $536 Reduced
Recent events (2)
- — I (S) $536.25
- — Z (S) $825.00
1910.242 B
- Issued
- Jun 18, 2002
- Abate by
- Jun 21, 2002
- Penalty
- Initial $825 · Current $536 Reduced
Recent events (2)
- — I (S) $536.25
- — Z (S) $825.00
1910.36 B04
- Issued
- Jun 18, 2002
- Abate by
- Jun 21, 2002
- Penalty
- Initial $1,100 · Current $715 Reduced
Recent events (2)
- — I (S) $715.00
- — Z (S) $1100.00
1910.37 Q06
- Issued
- Jun 18, 2002
- Abate by
- Jun 21, 2002
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C06 II
- Issued
- Jun 18, 2002
- Abate by
- Sep 16, 2002
- Penalty
- Initial $1,100 · Current $715 Reduced
Recent events (3)
- — P (S) $715.00
- — I (S) $715.00
- — Z (S) $1100.00
1910.147 E03
- Issued
- Jun 18, 2002
- Abate by
- Sep 16, 2002
Recent events (3)
- — P (S)
- — I (S)
- — Z (S)
1910.147 F02 I
- Issued
- Jun 18, 2002
- Abate by
- Sep 16, 2002
Recent events (3)
- — P (S)
- — I (S)
- — Z (S)
1910.303 F
- Issued
- Jun 18, 2002
- Abate by
- Jun 21, 2002
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Spinco Metal Products, INC
View Spinco Metal Products, INC's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 109912139.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.