KEWANEE, IL —
OSHA Inspection: GREAT DANE LTD. PARTNERSHIP
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GREAT DANE LTD. PARTNERSHIP in 2006 KENTVILLE ROAD, KEWANEE, IL 61443 (NAICS 000000). OSHA activity number 122195829.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GREAT DANE LTD. PARTNERSHIP
- Site address
- 2006 KENTVILLE ROAD
- City
- KEWANEE
- State
- IL
- ZIP
- 61443
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3715
- Employees
- 525
- Ownership type
- A
Citations
17 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 19, 1998
- Abate by
- Aug 24, 1998
- Penalty
- Initial $2,250 · Current $1,350 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees operating powered industrial trucks without using seat belts were exposed to the hazard of injury from tipover accidents which seat belts are designed to address: Throughout the facility, employees were exposed to the hazard of being pinned between a forklift and the ground in the event of a tipover, due to the fact that forklift operators were not required to wear the seat belts provided on the following Nissan, Mitsubishi, and Hyster forklifts: M-1, M-3, M-34, M-35, and M-41. Among other methods, one feasible and acceptable abatement method to correct this hazard is to require the use of the seat belts provided on the forklifts in accordance with ASME/ANSI B56.1-1995, Safety Standards for Low Lift and High Lift Trucks, Section 5.3.19.
Recent events (2)
- — I (S) $1350.00
- — Z (S) $2250.00
5(a)(1)
- Issued
- Aug 19, 1998
- Abate by
- Aug 27, 1998
- Penalty
- Initial $2,250 · Current $1,350 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of having their fingers/hands crushed or amputated: In the Fabrication Department, employees were exposed to the hazard of having their fingers/hands caught in the point of operation on the Cincinnati 65 ton press brake, Model Number M05-01, Assest Number F-19, due to the fact that the spring used in the clutch-brake control linkage was not of the compression type and guided on a rod or in a hole. Among other methods, one feasible and acceptable abatement method to correct this hazard is to install a compression type spring guided on a rod or in a hole in accordance with ANSI B11.3-1982, American National Standard for Machine Tools - Power Press Brakes - Safety Requirements for Construction, Care, and Use, Section 4.2.4.1.6.
Recent events (2)
- — I (S) $1350.00
- — Z (S) $2250.00
1910.23 C01
- Issued
- Aug 19, 1998
- Abate by
- Aug 31, 1998
- Penalty
- Initial $1,800 · Current $1,080 Reduced
Recent events (2)
- — I (S) $1080.00
- — Z (S) $1800.00
1910.106 E02 IIB2
- Issued
- Aug 19, 1998
- Abate by
- Oct 5, 1998
- Penalty
- Initial $2,250 · Current $1,350 Reduced
Recent events (2)
- — I (S) $1350.00
- — Z (S) $2250.00
1910.107 B05 I
- Issued
- Aug 19, 1998
- Abate by
- Aug 24, 1998
- Penalty
- Initial $2,250 · Current $1,350 Reduced
Recent events (2)
- — I (S) $1350.00
- — Z (S) $2250.00
1910.107 E09
- Issued
- Aug 19, 1998
- Abate by
- Aug 27, 1998
- Penalty
- Initial $2,250 · Current $1,350 Reduced
Recent events (2)
- — I (S) $1350.00
- — Z (S) $2250.00
1910.178 A04
- Issued
- Aug 19, 1998
- Abate by
- Sep 30, 1998
- Penalty
- Initial $1,800 · Current $1,080 Reduced
Recent events (2)
- — I (S) $1080.00
- — Z (S) $1800.00
1910.212 A01
- Issued
- Aug 19, 1998
- Abate by
- Sep 8, 1998
- Penalty
- Initial $1,800 · Current $1,080 Reduced
Recent events (2)
- — I (S) $1080.00
- — Z (S) $1800.00
1910.212 A03 II
- Issued
- Aug 19, 1998
- Abate by
- Oct 26, 1998
- Penalty
- Initial $4,500 · Current $2,700 Reduced
Recent events (2)
- — I (S) $2700.00
- — Z (S) $4500.00
1910.217 B07 III
- Issued
- Aug 19, 1998
- Abate by
- Aug 24, 1998
- Penalty
- Initial $2,250 · Current $1,350 Reduced
Recent events (2)
- — I (S) $1350.00
- — Z (S) $2250.00
1910.217 F02
- Issued
- Aug 19, 1998
- Abate by
- Oct 6, 1998
Recent events (2)
- — I (S)
- — Z (S)
1910.217 E01 II
- Issued
- Aug 19, 1998
- Abate by
- Aug 27, 1998
- Penalty
- Initial $2,250 · Current $1,350 Reduced
Recent events (2)
- — I (S) $1350.00
- — Z (S) $2250.00
1910.217 E03
- Issued
- Aug 19, 1998
- Abate by
- Oct 6, 1998
Recent events (2)
- — I (S)
- — Z (S)
1910.217 C01 I
- Issued
- Aug 19, 1998
- Abate by
- Aug 27, 1998
- Penalty
- Initial $2,250 · Current $1,350 Reduced
Recent events (2)
- — I (S) $1350.00
- — Z (S) $2250.00
1910.147 C04 II
- Issued
- Aug 19, 1998
- Abate by
- Aug 31, 1998
Recent events (2)
- — I (O)
- — Z (O)
1910.147 C06 I
- Issued
- Aug 19, 1998
- Abate by
- Nov 25, 1998
Recent events (2)
- — I (O)
- — Z (O)
1910.147 C06 II
- Issued
- Aug 19, 1998
- Abate by
- Dec 18, 1998
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Great Dane LTD. Partnership
View Great Dane LTD. Partnership's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 122195829.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.