SOLVAY, NY —
OSHA Inspection: FRAZER & JONES DIVISION OF THE EASTERN COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FRAZER & JONES DIVISION OF THE EASTERN COMPANY in 3000 MILTON AVE., SOLVAY, NY 13209 (NAICS 000000). OSHA activity number 300632817.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FRAZER & JONES DIVISION OF THE EASTERN COMPANY
- Site address
- 3000 MILTON AVE.
- City
- SOLVAY
- State
- NY
- ZIP
- 13209
- Mailing
- P.O. BOX 4955, SYRACUSE, NY 13221
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3322
- Employees
- 170
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
13 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 27, 1999
- Abate by
- Jul 30, 1999
- Penalty
- Initial $2,125 · Current $1,275 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to THE HAZARD OF BEING STRUCK-BY THE LOAD: a)Foundry Area, on or about 03/04/99; Two Lo Head Class B hoists (bridge cranes) did not have the rated load/capacity marked on them. ABATEMENT NOTES: 1.Mark the rated load/capacity on the hoist. 2.Follow the requirements of American National Standard for Overhead Hoists (ASME/ANSI B30.16 - 1987), Section 16-1.1. b)Foundry, E-Melt Area, on or about 03/05/99; One Robbins & Meyers model D3-3-17 hoist (charger crane), the pendant control controller's functions were not labeled as to indicate the direction of resultant motion. ABATEMENT NOTES: 1.Mark each control actuator to indicate the direction of resultant motion. 2.Follow the requirements of American National Standard for Overhead Hoists (ASME/ANSI B30.16 - 1987), Section 16-1.2.
Recent events (2)
- — I (S) $1275.00
- — Z (S) $2125.00
5(a)(1)
- Issued
- Jul 27, 1999
- Abate by
- Jul 30, 1999
- Penalty
- Initial $2,125 · Current $1,275 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to THE HAZARD OF INRUNNING NIP POINTS/OR BEING CAUGHT BY MOVING BELT: a)Foundry Area, on or about 03/05/99; Prepared Sand Conveyor troughing idlers: No stop cords/guards were present to prevent accidental employee contact with inrunning nip points created by conveyor belt & idlers. Employee walks along entire length of conveyor belt when it is running to obtain sand samples for testing. ABATEMENT NOTES: 1.Provide guards/stop cords along length of conveyor to prevent accidental employee contact with inrunning nip points. 2.Follow the requirements of American National Standard for Conveyors & Related Equipment (ANSI B20.1 - 1976), Section 5.11.2.3. b)Foundry Area, on or about 03/05/99; The conveyor systems for the Foundry Sand & Waste Sand were not provided with warning devices to alert employees in the areas that these conveyor systems were about to "start up". ABATEMENT NOTES: 1.Provide an audible warning device which can be clearly heard at all points along the conveyor. 2.Follow the requirements of American National Standard for Conveyors & Related Equipment (ANSI B20.1 - 1976), Section 5.11.2.2 (Foundry Sand System) & ANSI B20.1 - 1993, Section 5.11.2(b)(1) (Waste Sand System)
Recent events (2)
- — I (S) $1275.00
- — Z (S) $2125.00
1910.23 A07
- Issued
- Jul 27, 1999
- Abate by
- Jul 30, 1999
- Penalty
- Initial $2,125 · Current $1,275 Reduced
Recent events (2)
- — I (S) $1275.00
- — Z (S) $2125.00
1910.23 C01
- Issued
- Jul 27, 1999
- Abate by
- Jul 30, 1999
- Penalty
- Initial $1,700 · Current $1,020 Reduced
Recent events (2)
- — I (S) $1020.00
- — Z (S) $1700.00
1910.23 C02
- Issued
- Jul 27, 1999
- Abate by
- Jul 30, 1999
Recent events (2)
- — I (S)
- — Z (S)
1910.67 C02 II
- Issued
- Jul 27, 1999
- Abate by
- Jul 30, 1999
- Penalty
- Initial $2,125 · Current $1,275 Reduced
Recent events (2)
- — I (S) $1275.00
- — Z (S) $2125.00
1910.67 C02 IX
- Issued
- Jul 27, 1999
- Abate by
- Jul 30, 1999
Recent events (2)
- — I (S)
- — Z (S)
1910.212 A01
- Issued
- Jul 27, 1999
- Abate by
- Jul 30, 1999
- Penalty
- Initial $1,700 · Current $1,020 Reduced
Recent events (2)
- — I (S) $1020.00
- — Z (S) $1700.00
1910.215 B09
- Issued
- Jul 27, 1999
- Abate by
- Jul 30, 1999
- Penalty
- Initial $1,275 · Current $765 Reduced
Recent events (2)
- — I (S) $765.00
- — Z (S) $1275.00
1910.304 F04
- Issued
- Jul 27, 1999
- Abate by
- Jul 30, 1999
- Penalty
- Initial $2,125 · Current $1,275 Reduced
Recent events (2)
- — I (S) $1275.00
- — Z (S) $2125.00
1910.217 E01 II
- Issued
- Jul 27, 1999
- Abate by
- Jul 30, 1999
Recent events (2)
- — I (O)
- — Z (O)
1910.254 D09 III
- Issued
- Jul 27, 1999
- Abate by
- Jul 30, 1999
Recent events (2)
- — I (O)
- — Z (O)
1910.304 A02
- Issued
- Jul 27, 1999
- Abate by
- Jul 30, 1999
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Frazer & Jones Division of the Eastern Company
View Frazer & Jones Division of the Eastern Company's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 300632817.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.