SOUTH CHICAGO HEIGHTS, IL —
OSHA Inspection: COSMOS MANUFACTURING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of COSMOS MANUFACTURING, INC. in 111 E. 34TH ST., SOUTH CHICAGO HEIGHTS, IL 60411 (NAICS 000000). OSHA activity number 302106679.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COSMOS MANUFACTURING, INC.
- Site address
- 111 E. 34TH ST.
- City
- SOUTH CHICAGO HEIGHTS
- State
- IL
- ZIP
- 60411
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3499
- Employees
- 80
- Ownership type
- A
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- May 26, 1998
- Abate by
- Jun 28, 1998
- Penalty
- Initial $2,450 · Current $1,470 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Acto of 1970: the employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Warehouse - On or about April 30, 1998, fall protection was not provided for employees required to stand on a platform (pallet) raised by a fork truck to service a line hoist. Employees were exposed to falls up to 12 feet. A feasible means of correcting the hazard is to: (1) Use of a safety platform firmly secured to the lifting carriage and/or forks. (2) Restraining means such as rails, chains, etc., shall be in place, or a body belt with lanyard shall be worn by the person(s) on the platform. (3) An operator shall be in the control position of the truck or available to operate controls.
Recent events (2)
- — I (S) $1470.00
- — Z (S) $2450.00
1910.147 C01
- Issued
- May 26, 1998
- Abate by
- Jun 28, 1998
- Penalty
- Initial $1,050 · Current $630 Reduced
Recent events (2)
- — I (S) $630.00
- — Z (S) $1050.00
1910.217 B07 III
- Issued
- May 26, 1998
- Abate by
- May 29, 1998
- Penalty
- Initial $1,050 · Current $630 Reduced
Recent events (2)
- — I (S) $630.00
- — Z (S) $1050.00
1910.217 B13
- Issued
- May 26, 1998
- Abate by
- Jul 20, 1998
- Penalty
- Initial $1,750 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1750.00
1910.217 B14 II
- Issued
- May 26, 1998
- Abate by
- Jul 20, 1998
Recent events (2)
- — I (S)
- — Z (S)
1910.255 B04
- Issued
- May 26, 1998
- Abate by
- Jul 20, 1998
- Penalty
- Initial $1,750 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1750.00
1910.332 B01
- Issued
- May 26, 1998
- Abate by
- Jun 28, 1998
- Penalty
- Initial $1,050 · Current $630 Reduced
Recent events (2)
- — I (S) $630.00
- — Z (S) $1050.00
1910.333 B02 I
- Issued
- May 26, 1998
- Abate by
- Jun 28, 1998
1910.255 B05
- Issued
- May 26, 1998
- Abate by
- Jul 31, 1998
Recent events (2)
- — I (O)
- — Z (O)
1910.255 E
- Issued
- May 26, 1998
- Abate by
- Jun 18, 1998
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Cosmos Manufacturing, INC.
View Cosmos Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302106679.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.