SAN ANTONIO, TX —
OSHA Inspection: NEWELL INDUSTRIES, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of NEWELL INDUSTRIES, INC. in 440 LONE STAR - FOUNDRY DIVISION, SAN ANTONIO, TX 78204 (NAICS 000000). OSHA activity number 302344452.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NEWELL INDUSTRIES, INC.
- Site address
- 440 LONE STAR - FOUNDRY DIVISION
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78204
- Mailing
- P O BOX 10629, SAN ANTONIO, TX 78210
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3321
- Employees
- 150
- Ownership type
- A
Citations
29 citations on file for this inspection.
5(a)(1)
- Issued
- Jan 19, 2000
- Abate by
- Jan 26, 2000
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) In the heat treat area: The gas line near the heat treat furnace was not covered to protect it from falling objects. The forklift operator frequently placed and removed parts into the heat treat furnace throughout the day. The forklift being used to accomplish this task was equipped with one fork extension requiring the operator to balance the part being placed or removed from the furnace. This condition exposed employees to potential burns or flying objects resulting from a ruptured gas line. A feasible method of abatement includes, but is not limited to covering the exposed gas line with a metal plate fashioned above the line to prevent it from being ruptured by a fallen part.
1910.22 C
- Issued
- Jan 19, 2000
- Abate by
- Jan 26, 2000
- Penalty
- Initial $5,600 · Current $5,600
1910.23 A08
- Issued
- Jan 19, 2000
- Abate by
- Jan 26, 2000
1910.101 B
- Issued
- Jan 19, 2000
- Abate by
- Jan 24, 2000
- Penalty
- Initial $2,800 · Current $2,800
1910.178 P01
- Issued
- Jan 19, 2000
- Abate by
- Jan 27, 2000
- Penalty
- Initial $1,600 · Current $1,600
1910.178 Q07
- Issued
- Jan 19, 2000
- Abate by
- Jan 31, 2000
1910.178 Q06
- Issued
- Jan 19, 2000
- Abate by
- Jan 26, 2000
- Penalty
- Initial $2,800 · Current $2,800
1910.179 G01 V
- Issued
- Jan 19, 2000
- Abate by
- Jan 31, 2000
- Penalty
- Initial $2,800 · Current $2,800
1910.179 J03
- Issued
- Jan 19, 2000
- Abate by
- Feb 7, 2000
- Penalty
- Initial $2,800 · Current $2,800
1910.179 L03 IIIA
- Issued
- Jan 19, 2000
- Abate by
- Jan 26, 2000
- Penalty
- Initial $1,200 · Current $1,200
1910.179 N02 II
- Issued
- Jan 19, 2000
- Abate by
- Jan 31, 2000
- Penalty
- Initial $2,800 · Current $2,800
1910.212 A02
- Issued
- Jan 19, 2000
- Abate by
- Jan 31, 2000
- Penalty
- Initial $1,200 · Current $1,200
1910.219 D01
- Issued
- Jan 19, 2000
- Abate by
- Jan 27, 2000
- Penalty
- Initial $1,200 · Current $1,200
1910.219 E03 I
- Issued
- Jan 19, 2000
- Abate by
- Jan 27, 2000
1910.219 F03
- Issued
- Jan 19, 2000
- Abate by
- Jan 26, 2000
- Penalty
- Initial $1,600 · Current $1,600
1910.242 A
- Issued
- Jan 19, 2000
- Abate by
- Jan 24, 2000
- Penalty
- Initial $1,600 · Current $1,600
1910.242 B
- Issued
- Jan 19, 2000
- Abate by
- Jan 24, 2000
- Penalty
- Initial $2,800 · Current $2,800
1910.253 B04 III
- Issued
- Jan 19, 2000
- Abate by
- Jan 24, 2000
- Penalty
- Initial $1,600 · Current $1,600
1910.253 B04 IV
- Issued
- Jan 19, 2000
- Abate by
- Jan 25, 2000
1910.303 G02 I
- Issued
- Jan 19, 2000
- Abate by
- Jan 26, 2000
- Penalty
- Initial $1,200 · Current $1,200
1910.305 B02
- Issued
- Jan 19, 2000
- Abate by
- Jan 25, 2000
1910.305 B01
- Issued
- Jan 19, 2000
- Abate by
- Jan 31, 2000
- Penalty
- Initial $1,200 · Current $1,200
1910.23 C01
- Issued
- Jan 19, 2000
- Abate by
- Feb 7, 2000
- Penalty
- Initial $11,200 · Current $11,200
1910.178 A02
- Issued
- Jan 19, 2000
- Abate by
- Jan 25, 2000
- Penalty
- Initial $3,200 · Current $3,200
1910.179 N03 IV
- Issued
- Jan 19, 2000
- Abate by
- Jan 31, 2000
- Penalty
- Initial $5,600 · Current $5,600
1910.23 A05
- Issued
- Jan 19, 2000
- Abate by
- Jan 24, 2000
1910.141 D01
- Issued
- Jan 19, 2000
- Abate by
- Jan 27, 2000
1910.254 D09 III
- Issued
- Jan 19, 2000
- Abate by
- Jan 31, 2000
1910.303 F
- Issued
- Jan 19, 2000
- Abate by
- Jan 26, 2000
More inspections at Newell Industries, INC.
View Newell Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302344452.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.