CLIFTON, NJ —
OSHA Inspection: PARKWAY IRON & METAL CORP. T/A AMERICAN SHREDDING
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of PARKWAY IRON & METAL CORP. T/A AMERICAN SHREDDING in 613-39 ROUTE 46, CLIFTON, NJ 07013 (NAICS 000000). OSHA activity number 302781851.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PARKWAY IRON & METAL CORP. T/A AMERICAN SHREDDING
- Site address
- 613-39 ROUTE 46
- City
- CLIFTON
- State
- NJ
- ZIP
- 07013
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 5093
- Employees
- 25
- Ownership type
- A
Citations
9 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 11, 2000
- Abate by
- Oct 16, 2000
- Penalty
- Initial $750 · Current $375 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to contact with moving conveyor belts and pulley pinch points: a)Plant Separation facility: Conveyor lines used to transport and separate shredded metal scrap did not have work station stop buttons that permitted ready access in the event of an emergency, on or about 07/13/2000. Abatement Note: One feasible and acceptable abatement method, among others to correct this hazard, is to provide a " stop button" or a" pull cord" type emergency switch that would permit ready access along any work station on the conveyor as stipulated in ASME B20.1-1999 Safety Standards for Conveyors and Related Equipment, Section #5 General Safety Standards, paragraph 5.11.2 Control station, sub paragraph (c), and paragraph 5.12 Operations, sub paragraph (b).graph
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1910.23 C03
- Issued
- Oct 11, 2000
- Abate by
- Nov 13, 2000
- Penalty
- Initial $450 · Current $225 Reduced
Recent events (2)
- — I (S) $225.00
- — Z (S) $450.00
1910.27 F
- Issued
- Oct 11, 2000
- Abate by
- Nov 13, 2000
1910.28 A01
- Issued
- Oct 11, 2000
- Abate by
- Oct 16, 2000
1910.147 C04 II
- Issued
- Oct 11, 2000
- Abate by
- Oct 16, 2000
- Penalty
- Initial $600 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $600.00
1910.147 C05 I
- Issued
- Oct 11, 2000
- Abate by
- Oct 16, 2000
1910.147 C06 I
- Issued
- Oct 11, 2000
- Abate by
- Oct 16, 2000
1910.147 C07 I
- Issued
- Oct 11, 2000
- Abate by
- Oct 16, 2000
1910.305 B02
- Issued
- Oct 11, 2000
- Abate by
- Oct 16, 2000
- Penalty
- Initial $450 · Current $225 Reduced
Recent events (2)
- — I (S) $225.00
- — Z (S) $450.00
More inspections at Parkway Iron & Metal Corp. T/A American Shredding
View Parkway Iron & Metal Corp. T/A American Shredding's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302781851.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.