BOONSBORO, MD ·
OSHA Inspection: CENTRAL PRECISION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CENTRAL PRECISION, INC. in 20823 SAN MAR ROAD, BOONSBORO, MD 21713 (NAICS 000000). OSHA activity number 305125080.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CENTRAL PRECISION, INC.
- Site address
- 20823 SAN MAR ROAD
- City
- BOONSBORO
- State
- MD
- ZIP
- 21713
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3444
- Employees
- 48
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
20 citations on file for this inspection.
50104 A
- Issued
- Oct 29, 2002
- Abate by
- Nov 3, 2002
- Penalty
- Initial $1,800 · Current $500 Reduced
General-duty citation text
Labor and Employment Article, Section 5-104(a): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: (a)Date of Violation:09/05/02 Condition:Employees could be struck by ruptured plastic piping, 3/4" to 1 1/2" diameter Schedule 40 PVC piping and fittings installed from the air compressor through the entire shop area, used to distribute compressed air at 92 p.s.i. Among other methods, one feasible and acceptable abatement method to correct the hazard is to replace the PVC pipe with a proper compressed air piping system approved for this purpose. Abatement documentation (photographs, receipts, copies of programs, training certification, etc.) is required for this item.
Recent events (2)
- · I (S) $500.00
- · Z (S) $1800.00
1910.107 B09
- Issued
- Oct 29, 2002
- Abate by
- Nov 1, 2002
- Penalty
- Initial $562 · Current $100 Reduced
Recent events (2)
- · I (S) $100.00
- · Z (S) $562.00
1910.107 E02
- Issued
- Oct 29, 2002
- Abate by
- Nov 1, 2002
1910.132 F01 I
- Issued
- Oct 29, 2002
- Abate by
- Dec 1, 2002
- Penalty
- Initial $1,350 · Current $100 Reduced
Recent events (2)
- · I (S) $100.00
- · Z (S) $1350.00
1910.138 A
- Issued
- Oct 29, 2002
- Abate by
- Nov 3, 2002
1910.147 C04 I
- Issued
- Oct 29, 2002
- Abate by
- Dec 1, 2002
- Penalty
- Initial $1,575 · Current $1,000 Reduced
Recent events (2)
- · I (S) $1000.00
- · Z (S) $1575.00
1910.147 C06 IA
- Issued
- Oct 29, 2002
- Abate by
- Dec 1, 2002
1910.147 C07 I
- Issued
- Oct 29, 2002
- Abate by
- Dec 1, 2002
1910.178 L01 I
- Issued
- Oct 29, 2002
- Abate by
- Dec 1, 2002
- Penalty
- Initial $1,800 · Current $500 Reduced
Recent events (2)
- · I (S) $500.00
- · Z (S) $1800.00
1910.212 A03 II
- Issued
- Oct 29, 2002
- Abate by
- Nov 3, 2002
- Penalty
- Initial $1,575 · Current $250 Reduced
Recent events (2)
- · I (S) $250.00
- · Z (S) $1575.00
1910.1200 E01
- Issued
- Oct 29, 2002
- Abate by
- Nov 1, 2002
- Penalty
- Initial $1,575 · Current $250 Reduced
Recent events (2)
- · I (S) $250.00
- · Z (S) $1575.00
1910.1200 H01
- Issued
- Oct 29, 2002
- Abate by
- Dec 1, 2002
50405 B01
- Issued
- Oct 29, 2002
- Abate by
- Nov 3, 2002
50406 A01
- Issued
- Oct 29, 2002
- Abate by
- Nov 16, 2002
1910.132 D02
- Issued
- Oct 29, 2002
- Abate by
- Nov 3, 2002
1910.132 F04
- Issued
- Oct 29, 2002
- Abate by
- Dec 1, 2002
1910.147 C06 II
- Issued
- Oct 29, 2002
- Abate by
- Dec 1, 2002
1910.147 C07 IV
- Issued
- Oct 29, 2002
- Abate by
- Dec 1, 2002
1910.178 L06
- Issued
- Oct 29, 2002
- Abate by
- Dec 1, 2002
1910.303 F
- Issued
- Oct 29, 2002
- Abate by
- Nov 3, 2002
More inspections at Central Precision, INC.
View Central Precision, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in MD
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 305125080.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.