BOONSBORO, MD ·
OSHA Inspection: CENTRAL PRECISION, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of CENTRAL PRECISION, INC. in 20823 SAN MAR ROAD, BOONSBORO, MD 21713 (NAICS 000000). OSHA activity number 305404188.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CENTRAL PRECISION, INC.
- Site address
- 20823 SAN MAR ROAD
- City
- BOONSBORO
- State
- MD
- ZIP
- 21713
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3444
- Employees
- 48
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
25 citations on file for this inspection.
50104 A
- Issued
- Jan 15, 2003
- Abate by
- Feb 17, 2003
- Penalty
- Initial $2,250 · Current $500 Reduced
General-duty citation text
Labor and Employment Article, Section 5-104(a): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: (a)Date of Violation:09/17/02 Location:Sanding/Grinding Room Condition:Employees were exposed to fire and explosion hazards from the generation of combustible aluminum fines while grinding, sanding, and buffing a variety of aluminum sheet metal parts. Among other methods, one feasible and acceptable abatement method to correct this hazard is to comply with NFPA 651, Standard for the Machining and Finishing of Aluminum and the Handling of Aluminum Powder. Abatement documentation (photographs, receipts, copies of programs, training certification, etc.) is required for this item.
Recent events (2)
- · I (S) $500.00
- · Z (S) $2250.00
1910.106 D07 IA
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
- Penalty
- Initial $1,350 · Current $200 Reduced
Recent events (2)
- · I (S) $200.00
- · Z (S) $1350.00
1910.106 E09 IV
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
1910.106 E02 IVA
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
- Penalty
- Initial $900 · Current $100 Reduced
Recent events (2)
- · I (S) $100.00
- · Z (S) $900.00
1910.106 E09 III
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
1910.107 B05 IV
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
- Penalty
- Initial $900 · Current $500 Reduced
Recent events (2)
- · I (S) $500.00
- · Z (S) $900.00
1910.107 G02
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
1910.110 B06 VI
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
- Penalty
- Initial $1,800 · Current $100 Reduced
Recent events (2)
- · I (S) $100.00
- · Z (S) $1800.00
1910.132 A
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
- Penalty
- Initial $1,350 · Current $200 Reduced
Recent events (2)
- · I (S) $200.00
- · Z (S) $1350.00
1910.133 A01
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
1910.138 A
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
1910.151 C
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
- Penalty
- Initial $900 · Current $200 Reduced
Recent events (2)
- · I (S) $200.00
- · Z (S) $900.00
1910.242 B
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
- Penalty
- Initial $1,350 · Current $200 Reduced
Recent events (2)
- · I (S) $200.00
- · Z (S) $1350.00
1910.95 C01
- Issued
- Jan 15, 2003
- Abate by
- Feb 17, 2003
Recent events (2)
- · I (O)
- · Z (O)
1910.95 D01
- Issued
- Jan 15, 2003
- Abate by
- Feb 17, 2003
1910.95 G01
- Issued
- Jan 15, 2003
- Abate by
- Feb 17, 2003
1910.95 I02 IIA
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
1910.95 K01
- Issued
- Jan 15, 2003
- Abate by
- Feb 17, 2003
1910.124 H04
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
1910.134 C01
- Issued
- Jan 15, 2003
- Abate by
- Feb 17, 2003
1910.134 C03
- Issued
- Jan 15, 2003
- Abate by
- Feb 17, 2003
1910.134 E01
- Issued
- Jan 15, 2003
- Abate by
- Feb 17, 2003
1910.134 F02
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
1910.134 K01
- Issued
- Jan 15, 2003
- Abate by
- Feb 17, 2003
1910.305 B01
- Issued
- Jan 15, 2003
- Abate by
- Jan 20, 2003
More inspections at Central Precision, INC.
View Central Precision, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in MD
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 305404188.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.