MIAMI, FL —
OSHA Inspection: MILANS MACHINE SHOP & WELDING, INC.
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of MILANS MACHINE SHOP & WELDING, INC. in 8052 NW 56TH STREET, MIAMI, FL 33166 (NAICS 333512). OSHA activity number 306179052.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MILANS MACHINE SHOP & WELDING, INC.
- Site address
- 8052 NW 56TH STREET
- City
- MIAMI
- State
- FL
- ZIP
- 33166
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333512
- SIC code (legacy)
- 3541
- Employees
- 35
- Ownership type
- A
Citations
16 citations on file for this inspection.
5(a)(1)
- Issued
- Nov 5, 2003
- Abate by
- Nov 14, 2003
- Penalty
- Initial $875 · Current $450 Reduced
General-duty citation text
Section 5(A)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish to each of his employees employment and a place of employment which were free from recognized hazards that were causing or were likely to cause death or serious physical harm to employees in that employees were exposed to: On or about 5/14/03 employees were exposed to the hazard of being run over by an S & S Crane #89-1602-A2 that was being operated in the vicinity of employees without proper personnel-deflecting guards around the leading edges of front and rear wheels. Among other methods, one feasible and acceptable abatement method is to install personnel- deflecting guards around the leading edges of front and rear wheels. Deflecting guards should extend and be designed in such a manner to push persons out of the way of an oncoming vehicle and not capable of running them over. PLEASE NOTE: CERTIFICATION OF ABATEMENT IS REQUIRED FOR THIS VIOLATION.
Recent events (2)
- — I (S) $450.00
- — Z (S) $875.00
5(a)(1)
- Issued
- Nov 5, 2003
- Abate by
- Nov 12, 2003
- Penalty
- Initial $700 · Current $350 Reduced
General-duty citation text
Section 5(A)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish to each of his employees employment and a place of employment which were free from recognized hazards that were causing or were likely to cause death or serious physical harm to employees in that employees were exposed to: On or about 5/14/03, on the South side of the establishment, employees were using a pipe threader serial number 120075 which was not provided with a constant pressure foot control switch as required by American National Standards Institute B208-1-1982, Section 4.4. Among other methods, one feasible and acceptable method of abatement is : Provide the pipe threader with a constant foot control switch in accordance with ANSI B 208.1- 1982, Section 4.4 PLEASE NOTE: CERTIFICATION OF ABATEMENT IS REQUIRED FOR THIS VIOLATION.
Recent events (2)
- — I (S) $350.00
- — Z (S) $700.00
1910.133 A03
- Issued
- Nov 5, 2003
- Abate by
- Nov 12, 2003
- Penalty
- Initial $700 · Current $350 Reduced
Recent events (2)
- — I (S) $350.00
- — Z (S) $700.00
1910.178 M05 III
- Issued
- Nov 5, 2003
- Abate by
- Nov 12, 2003
- Penalty
- Initial $700 · Current $350 Reduced
Recent events (2)
- — I (S) $350.00
- — Z (S) $700.00
1910.212 A03 II
- Issued
- Nov 5, 2003
- Abate by
- Nov 13, 2003
- Penalty
- Initial $2,500 · Current $1,400 Reduced
Recent events (2)
- — I (S) $1400.00
- — Z (S) $2500.00
1910.212 B
- Issued
- Nov 5, 2003
- Abate by
- Nov 12, 2003
- Penalty
- Initial $700 · Current $350 Reduced
Recent events (2)
- — I (S) $350.00
- — Z (S) $700.00
1910.215 A02
- Issued
- Nov 5, 2003
- Abate by
- Nov 12, 2003
- Penalty
- Initial $700 · Current $350 Reduced
Recent events (2)
- — I (S) $350.00
- — Z (S) $700.00
1910.215 A04
- Issued
- Nov 5, 2003
- Abate by
- Nov 12, 2003
Recent events (2)
- — I (S)
- — Z (S)
1910.219 E01 I
- Issued
- Nov 5, 2003
- Abate by
- Nov 14, 2003
- Penalty
- Initial $875 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $875.00
1910.242 B
- Issued
- Nov 5, 2003
- Abate by
- Nov 12, 2003
- Penalty
- Initial $875 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $875.00
1910.252 A02 XV
- Issued
- Nov 5, 2003
- Abate by
- Nov 12, 2003
- Penalty
- Initial $875 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $875.00
1910.252 A03 I
- Issued
- Nov 5, 2003
- Abate by
- Nov 12, 2003
- Penalty
- Initial $4,900 · Current $4,900
Recent events (2)
- — I (S) $4900.00
- — Z (S) $4900.00
1910.303 F
- Issued
- Nov 5, 2003
- Abate by
- Nov 12, 2003
Recent events (2)
- — I (O)
- — Z (O)
1910.303 G01 II
- Issued
- Nov 5, 2003
- Abate by
- Nov 12, 2003
Recent events (2)
- — I (O)
- — Z (O)
1910.305 B01
- Issued
- Nov 5, 2003
- Abate by
- Nov 12, 2003
Recent events (2)
- — I (O)
- — Z (O)
1910.305 G01 I
- Issued
- Nov 5, 2003
- Abate by
- Nov 12, 2003
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Milans Machine Shop & Welding, INC.
View Milans Machine Shop & Welding, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333512)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 306179052.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.