Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: R.H. BAKER & SON CONSTRUCTION, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of R.H. BAKER & SON CONSTRUCTION, INC. in FAIRFIELD DRIVE, LOT 34, DENTON, MD 21629 (NAICS 238130). OSHA activity number 306675570.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch R.H. Baker & SON Construction, INC. — free Get an email when a new federal OSHA severe-injury report for R.H. Baker & SON Construction, INC. is published. One employer, no account, unsubscribe in one click.
Site address
FAIRFIELD DRIVE, LOT 34
City
DENTON
State
MD
ZIP
21629
Mailing
P.O. BOX 127, EDGEWATER, MD 21037
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Data loaded
NAICS code
238130
SIC code (legacy)
1751
Employees
4
Ownership type
A
Industry flags
Construction safety.

4 citations on file for this inspection.

50104 A

Serious 1 instance 3 exposed
Issued
May 28, 2003
Abate by
Jun 2, 2003
Penalty
Initial $1,225 · Current $450 Reduced
Labor and Employment Article, Section 5-104(a):  The employer did not
furnish employment and a place of
employment which were free from recognized hazards that were causing or
likely to cause death or serious physical
harm to employees:
(a)Date of Violation:04/22/03
Location:Rooftop of House
Condition:Roof trusses were braced using only a single 2" by 4" "spacer"
board, approximately 24" in
length, placed between trusses.
Among others, one feasible and acceptable abatement method to correct this
hazard is to install bracing in accordance
with the Truss Plate Institute's HIB-91 summary sheet, or follow the
manufacturer's recommendations for bracing
roof trusses.
Abatement documentation (photographs, receipts, copies of programs,
training certification, etc.) is
required for this item.
Recent events (2)
  • — I (S) $450.00
  • — Z (S) $1225.00

1926.100 A

Serious 1 instance 3 exposed
Issued
May 28, 2003
Abate by
Jun 2, 2003
Penalty
Initial $1,050 · Current $250 Reduced
Recent events (2)
  • — I (S) $250.00
  • — Z (S) $1050.00

1926.405 G02 IV

Other-than-serious 1 instance 2 exposed
Issued
May 28, 2003
Abate by
Jun 2, 2003
Recent events (2)
  • — I (O)
  • — Z (O)

1926.416 E01

Other-than-serious 1 instance 2 exposed
Issued
May 28, 2003
Abate by
Jun 2, 2003
Recent events (2)
  • — I (O)
  • — Z (O)

View R.H. Baker & SON Construction, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 306675570.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.