DIXON, IL ·
OSHA Inspection: ALLIED-LOCKE INDUSTRIES, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ALLIED-LOCKE INDUSTRIES, INC. in 1088 CORREGIDOR ROAD, DIXON, IL 61021 (NAICS 332116). OSHA activity number 306725300.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALLIED-LOCKE INDUSTRIES, INC.
- Site address
- 1088 CORREGIDOR ROAD
- City
- DIXON
- State
- IL
- ZIP
- 61021
- Mailing
- P. O. BOX 509, DIXON, IL 61021
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- SIC code (legacy)
- 3469
- Employees
- 275
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Apr 29, 2004
- Abate by
- May 4, 2004
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
Public Law 91-596 Section 5 (a) (1) of the Occupational Safety and Health Act of 1970: Each employer shall furnish to each of his employees employment and a place of employment which are free from recognized hazards that are causing or are likely to cause injuries created by contact with the swinging arm of the robot. Pin Drilling Department - Robotic system was not equipped with an operational interlocked gate. Among other methods a feasible and acceptable means of abatement to correct these hazards is to instruct and train workers on safe work procedures before the operation of this machinery. as outlined in ANSI/RIA R15.06-1986 6.2.3. Additionally ensure adequate supervision that correct operating procedures are being followed. EMPLOYER SENT PHOTOGRAPHS OF INTERLOCKS INSTALLED.
Recent events (2)
- · I (S) $1750.00
- · Z (S) $3500.00
5(a)(1)
- Issued
- Apr 29, 2004
- Abate by
- May 4, 2004
- Penalty
- Initial $3,500 · Current $1,000 Reduced
General-duty citation text
Public Law 91-596 Section 5 (a) (1) of the Occupational Safety and Health Act of 1970: Each employer shall furnish to each of his employees employment and a place of employment which are free from recognized hazards that are causing or are likely to cause amputations. The maximum tonnage indication for a hydraulic press was not stamped to the machine. Among other methods, a feasible and acceptable means of abatement to correct these hazards is to instruct and train workers on safe work procedures before the operation of this machinery as outlined in ANSI B11.2-1982 3.4.1.1 and 3.8.1.1. CSHO VERIFIED THAT THE PRESS WAS TAKEN OUT OF SERVICED
Recent events (2)
- · I (S) $1000.00
- · Z (S) $3500.00
1910.178 Q01
- Issued
- Apr 29, 2004
- Abate by
- May 17, 2004
- Penalty
- Initial $1,500 · Current $750 Reduced
Recent events (2)
- · I (S) $750.00
- · Z (S) $1500.00
1910.212 A03 II
- Issued
- Apr 29, 2004
- Abate by
- May 4, 2004
- Penalty
- Initial $5,000 · Current $2,500 Reduced
Recent events (2)
- · I (S) $2500.00
- · Z (S) $5000.00
More inspections at Allied-Locke Industries, INC.
View Allied-Locke Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332116)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 306725300.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.