HAMPSTEAD, NH —
OSHA Inspection: MARTIN AUGER D/B/A AUGER PROPERTY MAINTENANCE
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MARTIN AUGER D/B/A AUGER PROPERTY MAINTENANCE in 8 OWENS CT., HAMPSTEAD, NH 03841 (NAICS 561730). OSHA activity number 309551786.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARTIN AUGER D/B/A AUGER PROPERTY MAINTENANCE
- Site address
- 8 OWENS CT.
- City
- HAMPSTEAD
- State
- NH
- ZIP
- 03841
- Mailing
- PO BOX 197, HAMPSTEAD, NH 03841
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561730
- SIC code (legacy)
- 0782
- Employees
- 19
- Ownership type
- A
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 4, 2006
- Abate by
- Oct 8, 2006
- Penalty
- Initial $2,100 · Current $2,100
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by running blades: a.8 Owens Ct. - A Walker ride-on mower, with a mowing deck s/n of D-7 60315, was not equipped with functioning shutoff switch under the seat, on or about June 13, 2006. The shutoff switch under the seat had been unplugged. ABATEMENT NOTE: Among other methods, one feasible and acceptable means of abatement would be to ensure that interlock switches are functioning correctly, as indicated in the manufacturer's Owner's Manual.
Recent events (2)
- — I (S) $2100.00
- — Z (S) $2100.00
1910.132 D01
- Issued
- Oct 4, 2006
- Abate by
- Oct 17, 2006
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1910.147 C01
- Issued
- Oct 4, 2006
- Abate by
- Nov 6, 2006
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1910.157 G01
- Issued
- Oct 4, 2006
- Abate by
- Nov 6, 2006
- Penalty
- Initial $450 · Current $225 Reduced
Recent events (2)
- — I (S) $225.00
- — Z (S) $450.00
1910.215 A04
- Issued
- Oct 4, 2006
- Abate by
- Oct 10, 2006
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1910.215 B09
- Issued
- Oct 4, 2006
- Abate by
- Oct 10, 2006
Recent events (2)
- — I (S)
- — Z (S)
1910.253 B04 I
- Issued
- Oct 4, 2006
- Abate by
- Oct 8, 2006
- Penalty
- Initial $450 · Current $225 Reduced
Recent events (2)
- — I (S) $225.00
- — Z (S) $450.00
1904.29 A
- Issued
- Oct 4, 2006
- Abate by
- Oct 10, 2006
Recent events (2)
- — I (O)
- — Z (O)
1910.37 B07
- Issued
- Oct 4, 2006
- Abate by
- Oct 10, 2006
Recent events (2)
- — I (O)
- — Z (O)
1910.244 A01 II
- Issued
- Oct 4, 2006
- Abate by
- Oct 8, 2006
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Martin Auger D/B/A Auger Property Maintenance
View Martin Auger D/B/A Auger Property Maintenance's full OSHA safety record →
More inspections in this industry (NAICS 561730)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309551786.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.