RALEIGH, NC —
OSHA Inspection: DUNCAN STEEL ERECTION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DUNCAN STEEL ERECTION, INC. in 1775 EAST INTERNATIONAL DRIVE, RALEIGH, NC 27623 (NAICS 236220). OSHA activity number 309742070.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DUNCAN STEEL ERECTION, INC.
- Site address
- 1775 EAST INTERNATIONAL DRIVE
- City
- RALEIGH
- State
- NC
- ZIP
- 27623
- Mailing
- PO BOX 865, CLAYTON, NC 27520
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- SIC code (legacy)
- 1542
- Employees
- 6
- Ownership type
- A
- Industry flags
- Construction safety.
Citations
2 citations on file for this inspection.
95012901
- Issued
- Feb 21, 2006
- Abate by
- Feb 24, 2006
- Penalty
- Initial $700 · Current $455 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a fall to a lower level ref: para 5.15.1(k) ASME B56.6-1992: a)1775 East International Drive-three employees working in a work platform attached to a SKYTRAK 6036 all terrain fork lift, were not properly wearing fall protection. while working at an elevation of approximately 35 feet.(ref para 5.15.1(k) ASME B56.6-1992) One feasible means of abatement is to assure all employees exposed to falls properly utilize fall protection.
Recent events (2)
- — I (S) $455.00
- — Z (S) $700.00
95012901
- Issued
- Feb 21, 2006
- Abate by
- Feb 24, 2006
- Penalty
- Initial $700
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a fall to lower levels ref: para 5.15.1(u) ASME B56.6-1992: a)1775 East International Drive-an employee was observed exiting the floor and protected area of the work platform attached to the forks of a SKYTRAK 6036 all terrain fork lift, and straddling the guard rail, 35 feet above the ground, and was improperly wearing fall protection. (ref: para 5.15.1(u) ASME B56.6-1992) One feasible means of abatement is to ensure all employees wear proper fall protection and remain inside the work station.
Recent events (2)
- — I (S)
- — Z (S) $700.00
More inspections at Duncan Steel Erection, INC.
View Duncan Steel Erection, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 236220)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309742070.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.