ASHEVILLE, NC —
OSHA Inspection: ASHEVILLE METAL FINISHING, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of ASHEVILLE METAL FINISHING, INC. in 178 CLINGMAN AVE., ASHEVILLE, NC 28801 (NAICS 332813). OSHA activity number 309919967.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ASHEVILLE METAL FINISHING, INC.
- Site address
- 178 CLINGMAN AVE.
- City
- ASHEVILLE
- State
- NC
- ZIP
- 28801
- Mailing
- PO BOX 16237, ASHEVILLE, NC 28816
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332813
- SIC code (legacy)
- 3471
- Employees
- 18
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
17 citations on file for this inspection.
95012901
- Issued
- May 23, 2006
- Abate by
- May 26, 2006
- Penalty
- Initial $100 · Current $100
General-duty citation text
NOTE: Among other methods, one feasible acceptable abatement method to correct this hazard is to conduct load testing on the monorail crane system per the requirements of section 2.2.2.of ANSI B30-11-1998.
95012901
- Issued
- May 23, 2006
- Abate by
- May 26, 2006
- Penalty
- Initial $100 · Current $100
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: (a) Facility, Silver Line - Monorail crane system with one hoist was not inspected annually. REF: ANSI B30.11-1998, Chapter 11-2, Paragraph 11-2.1.3 (a)Periodic inspections shall be performed at intervals defined in para. 11-2.1.1(b)(2): Visual inspection by an appointed person making records of apparent external conditions to provide the basis for a continuing evaluation, as follows: normal service, equipment in place --- annually. (c) A qualified person shall examine any deficiencies found during the inspection to determine whether conditions found constitute a hazard, require disassembly for further inspection, or require replacement. NOTE: Among other methods, one feasible acceptable abatement method to correct this hazard is to conduct annual, periodic inspections on the monorail crane system per the requirements of section 11-2.1.3 of ANSI B30-11-1998.
1910.151 C
- Issued
- May 23, 2006
- Abate by
- May 26, 2006
- Penalty
- Initial $100 · Current $100
1910.304 F04
- Issued
- May 23, 2006
- Abate by
- May 26, 2006
- Penalty
- Initial $100 · Current $100
1910.305 J02 II
- Issued
- May 23, 2006
- Abate by
- Jun 19, 2006
- Penalty
- Initial $1,400 · Current $700 Reduced
Recent events (2)
- — I (S) $700.00
- — Z (S) $1400.00
1910.303 G02 I
- Issued
- May 23, 2006
- Abate by
- Jun 19, 2006
1910.1200 F05 II
- Issued
- May 23, 2006
- Abate by
- Jun 19, 2006
- Penalty
- Initial $100 · Current $100
1910.22 D01
- Issued
- May 23, 2006
- Abate by
- May 26, 2006
1910.110 F02 I
- Issued
- May 23, 2006
- Abate by
- May 26, 2006
1910.157 C04
- Issued
- May 23, 2006
- Abate by
- May 26, 2006
- Penalty
- Initial $100 · Current $100
1910.157 E02
- Issued
- May 23, 2006
- Abate by
- May 26, 2006
1910.157 E03
- Issued
- May 23, 2006
- Abate by
- May 26, 2006
1910.303 B02
- Issued
- May 23, 2006
- Abate by
- May 26, 2006
1910.303 G01 IV
- Issued
- May 23, 2006
- Abate by
- May 26, 2006
1910.305 B01
- Issued
- May 23, 2006
- Abate by
- May 26, 2006
1910.305 G01 IIIB
- Issued
- May 23, 2006
- Abate by
- May 26, 2006
1910.305 G02 II
- Issued
- May 23, 2006
- Abate by
- May 26, 2006
More inspections at Asheville Metal Finishing, INC.
View Asheville Metal Finishing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332813)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309919967.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.