DENVER, CO —
OSHA Inspection: SOLID ROCK, LLC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of SOLID ROCK, LLC in 1031 W. CENTER AVE, DENVER, CO 80223 (NAICS 327991). OSHA activity number 310467733.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SOLID ROCK, LLC
- Site address
- 1031 W. CENTER AVE
- City
- DENVER
- State
- CO
- ZIP
- 80223
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- SIC code (legacy)
- 3281
- Employees
- 8
- Ownership type
- A
Citations
25 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 20, 2007
- Abate by
- Oct 3, 2007
- Penalty
- Initial $1,500 · Current $1,500
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish to each of his employees employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a struck by hazard which could inflict death or serious injury while transferring granite slabs from the storage yard to the fabrication shop: (a) Solid Rock, LLC, 1031 West Center Avenue, Denver, CO 80223 : The granite slabs were stored inside the fabrication shop. They were stored on metal rack at an angle of 80 degrees. The slabs were not secured with any type of device that could be used to control the movement of the slabs while they were being attached to the extension of the forklift. When transporting a slab, employees stood in the fall shadow of the granite slab. This posed a "struck-by hazard" to the employees performing this work. Abatement Note: Abatement Certification and documentation are required for this item (see enclosed "Sample Abatement-Certification Letter"). Among other methods, one feasible and acceptable abatement method to correct this hazard is to perform the following: A slab wedge can be used to separate the granite slabs from one another by having two employees stand to the side of the slab and insert the wedge so that a clamping device can be placed onto the slab to be moved. Employees should be trained never to stand in the fall shadow of the granite slab while transporting it.nsporting
1910.132 D02
- Issued
- Sep 20, 2007
- Abate by
- Oct 24, 2007
- Penalty
- Initial $1,050 · Current $1,050
1910.133 A01
- Issued
- Sep 20, 2007
- Abate by
- Oct 3, 2007
1910.136 A
- Issued
- Sep 20, 2007
- Abate by
- Oct 3, 2007
1910.106 E02 IIB1
- Issued
- Sep 20, 2007
- Abate by
- Oct 3, 2007
- Penalty
- Initial $450 · Current $450
1910.106 E02 II
- Issued
- Sep 20, 2007
- Abate by
- Oct 3, 2007
1910.215 A01
- Issued
- Sep 20, 2007
- Abate by
- Oct 3, 2007
- Penalty
- Initial $450 · Current $450
1910.305 B02
- Issued
- Sep 20, 2007
- Abate by
- Oct 3, 2007
- Penalty
- Initial $600 · Current $600
1910.305 J02 II
- Issued
- Sep 20, 2007
- Abate by
- Oct 3, 2007
- Penalty
- Initial $600 · Current $600
1910.334 A02 I
- Issued
- Sep 20, 2007
- Abate by
- Oct 3, 2007
1910.334 A02 II
- Issued
- Sep 20, 2007
- Abate by
- Oct 3, 2007
1910.305 G01 IIIA
- Issued
- Sep 20, 2007
- Abate by
- Oct 3, 2007
1910.1000 C
- Issued
- Sep 20, 2007
- Abate by
- Dec 24, 2007
- Penalty
- Initial $1,500 · Current $1,500
1910.1000 E
- Issued
- Sep 20, 2007
- Abate by
- Dec 24, 2007
1910.134 C01
- Issued
- Sep 20, 2007
- Abate by
- Oct 11, 2007
1910.134 D01 III
- Issued
- Sep 20, 2007
- Abate by
- Sep 25, 2007
1910.134 E01
- Issued
- Sep 20, 2007
- Abate by
- Oct 11, 2007
1910.134 F01
- Issued
- Sep 20, 2007
- Abate by
- Oct 11, 2007
1910.134 G01 IA
- Issued
- Sep 20, 2007
- Abate by
- Oct 11, 2007
1910.134 K01
- Issued
- Sep 20, 2007
- Abate by
- Oct 11, 2007
1910.1200 E01
- Issued
- Sep 20, 2007
- Abate by
- Oct 24, 2007
- Penalty
- Initial $1,050 · Current $1,050
1910.1200 E01 I
- Issued
- Sep 20, 2007
- Abate by
- Oct 24, 2007
1910.1200 H01
- Issued
- Sep 20, 2007
- Abate by
- Oct 24, 2007
1910.110 F02 II
- Issued
- Sep 20, 2007
- Abate by
- Oct 3, 2007
1910.303 G01 I
- Issued
- Sep 20, 2007
- Abate by
- Oct 3, 2007
More inspections at Solid Rock, LLC
View Solid Rock, LLC's full OSHA safety record →
More inspections in this industry (NAICS 327991)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 310467733.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.