EAST SYRACUSE, NY —
OSHA Inspection: EAGLE METALCRAFT INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of EAGLE METALCRAFT INC in 3550 BURNET AVE., EAST SYRACUSE, NY 13057 (NAICS 332322). OSHA activity number 310751763.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EAGLE METALCRAFT INC
- Site address
- 3550 BURNET AVE.
- City
- EAST SYRACUSE
- State
- NY
- ZIP
- 13057
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- SIC code (legacy)
- 3444
- Employees
- 22
- Ownership type
- A
Citations
7 citations on file for this inspection.
5(a)(1)
- Issued
- Nov 8, 2007
- Abate by
- Jan 15, 2008
- Penalty
- Initial $300 · Current $195 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by the load should the overhead hoist, below-the- hook lifting device or bridge crane system fail: a)Laser Area, on or about 10/30/07: The Gorbel bridge crane structure rated for 2000 lbs. with a Demag overhead hoist attached which was rated at 2200 lbs. was underrated for what the hoist capacity was rated for. Among other methods, one feasible and acceptable abatement method to correct this hazard is to: 1.Prior to installation and use, ensure the supporting structure is designed to withstand the loads and forces imposed by the hoist for the rated load in accordance with ANSI B30.11-1980, Section 11-2.2.2. b)Laser Area and Plating Area, on or about 10/30/07: There were no inspections conducted on a Demag electric overhead hoist and a Ingersoll Rand air hoist. Among other methods, one feasible and acceptable abatement method to correct this hazard is to: 1.Inspect the overhead hoists in accordance with ANSI B30.16-1993, Section 16- 2.1. c)Laser Area, on or about 10/30/07: There were no inspections conducted on an Anver vacuum lift VLS-07. Among other methods, one feasible and acceptable abatement method to correct this hazard is to: 1.Inspect the vacuum lift in accordance with ANSI B30.20-1993, Section 20-2.3. Abatement certification must be submitted for these items.
Recent events (3)
- — P (S) $195.00
- — I (S) $195.00
- — Z (S) $300.00
1910.157 G02
- Issued
- Nov 8, 2007
- Abate by
- Jan 15, 2008
- Penalty
- Initial $225 · Current $146 Reduced
Recent events (3)
- — P (O) $146.25
- — I (O) $146.25
- — Z (S) $225.00
1910.219 C02 I
- Issued
- Nov 8, 2007
- Abate by
- Dec 11, 2007
- Penalty
- Initial $300 · Current $195 Reduced
Recent events (2)
- — I (S) $195.00
- — Z (S) $300.00
1910.219 D01
- Issued
- Nov 8, 2007
- Abate by
- Dec 11, 2007
Recent events (2)
- — I (S)
- — Z (S)
1910.219 E03 I
- Issued
- Nov 8, 2007
- Abate by
- Dec 11, 2007
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C06 I
- Issued
- Nov 8, 2007
- Abate by
- Jan 15, 2008
Recent events (3)
- — P (O)
- — I (O)
- — Z (O)
1910.178 L04 III
- Issued
- Nov 8, 2007
- Abate by
- Jan 15, 2008
Recent events (3)
- — P (O)
- — I (O)
- — Z (O)
More inspections at Eagle Metalcraft INC
View Eagle Metalcraft INC's full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 310751763.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.