VERONA, WI —
OSHA Inspection: VOSBERG CONSTRUCTION, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of VOSBERG CONSTRUCTION, LLC in 919 GLENWOOD DRIVE, VERONA, WI 53593 (NAICS 238130). OSHA activity number 310765995.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VOSBERG CONSTRUCTION, LLC
- Site address
- 919 GLENWOOD DRIVE
- City
- VERONA
- State
- WI
- ZIP
- 53593
- Mailing
- 704 STONEY HILL AVENUE, COTTAGE GROVE, WI 53527
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- SIC code (legacy)
- 1751
- Employees
- 4
- Ownership type
- A
Citations
7 citations on file for this inspection.
5(a)(1)
- Issued
- May 9, 2008
- Abate by
- May 15, 2008
- Penalty
- Initial $600 · Current $420 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Hazards created by the use of elevated work platforms which were not designed, constructed and/or used in accordance with the acceptable requirements of the American National Safety Standard for Rough Terrain Forklift Trucks, ASME B56.6-2002. The personnel platform and its use did not meet the design requirements of that standard in the following areas: (1) A trained operator was not in position to control the rough terrain forklift or available to operate the controls. When the operator was not in the operating position, the truck wheels were not blocked and the parking brake was not applied with travel controls in neutral. Among other methods, one feasible and acceptable abatement method to correct these hazards is to assure that the design, manufacture and use of all attachments for Rough Terrain Forklift Trucks are in accordance with the most current American National Standard, B56.6.
Recent events (2)
- — I (S) $420.00
- — Z (S) $600.00
1926.451 A06
- Issued
- May 9, 2008
- Abate by
- May 15, 2008
- Penalty
- Initial $600 · Current $420 Reduced
Recent events (2)
- — I (S) $420.00
- — Z (S) $600.00
1926.602 C01 I
- Issued
- May 9, 2008
- Abate by
- May 22, 2008
Recent events (2)
- — I (S)
- — Z (S)
1926.451 G01 VII
- Issued
- May 9, 2008
- Abate by
- May 15, 2008
- Penalty
- Initial $600 · Current $420 Reduced
Recent events (2)
- — I (S) $420.00
- — Z (S) $600.00
1926.501 B13
- Issued
- May 9, 2008
- Abate by
- May 15, 2008
Recent events (2)
- — I (S)
- — Z (S)
1926.454 A
- Issued
- May 9, 2008
- Abate by
- May 15, 2008
- Penalty
- Initial $600 · Current $420 Reduced
Recent events (2)
- — I (S) $420.00
- — Z (S) $600.00
1926.501 B01
- Issued
- May 9, 2008
- Abate by
- May 15, 2008
- Penalty
- Initial $600 · Current $420 Reduced
Recent events (2)
- — I (S) $420.00
- — Z (S) $600.00
More inspections at Vosberg Construction, LLC
View Vosberg Construction, LLC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 310765995.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.