THOROFARE, NJ —
OSHA Inspection: P & M INDUSTRIES, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of P & M INDUSTRIES, INC. in 1425 GRANDVIEW AVE., THOROFARE, NJ 08086 (NAICS 332322). OSHA activity number 311159321.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- P & M INDUSTRIES, INC.
- Site address
- 1425 GRANDVIEW AVE.
- City
- THOROFARE
- State
- NJ
- ZIP
- 08086
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- SIC code (legacy)
- 3444
- Employees
- 55
- Ownership type
- A
Citations
8 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 30, 2007
- Abate by
- Jun 1, 2008
- Penalty
- Initial $1,250 · Current $775 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to an amputation hazard: a). Production shop (press brake area) - Where point of operation guarding was not feasible, the employer did not develop and implement a minimum safe distance program for the protection of press brake operators. On or about 8-15-07. One feasible and acceptable abatement method is to develop and implement a safe distance program that conforms to the requirements of ANSI B11.3-1982, Paragraph 6.1.4.3 and OSHA Directive CPL 2-1.25. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.CE
Recent events (3)
- — J (S) $775.00
- — F (S) $775.00
- — Z (S) $1250.00
1910.212 A01
- Issued
- Oct 30, 2007
- Abate by
- Dec 21, 2007
- Penalty
- Initial $1,000 · Current $620 Reduced
Recent events (3)
- — J (S) $620.00
- — F (S) $620.00
- — Z (S) $1000.00
1910.215 A04
- Issued
- Oct 30, 2007
- Abate by
- Nov 27, 2007
- Penalty
- Initial $1,000 · Current $620 Reduced
Recent events (3)
- — J (S) $620.00
- — F (S) $620.00
- — Z (S) $1000.00
1910.305 G02 III
- Issued
- Oct 30, 2007
- Abate by
- Jan 11, 2008
- Penalty
- Initial $750 · Current $465 Reduced
Recent events (3)
- — J (S) $465.00
- — F (S) $465.00
- — Z (S) $750.00
1910.1052 D02
- Issued
- Oct 30, 2007
- Abate by
- Nov 27, 2007
- Penalty
- Initial $750 · Current $465 Reduced
Recent events (3)
- — J (S) $465.00
- — F (S) $465.00
- — Z (S) $750.00
1910.1052 L01
- Issued
- Oct 30, 2007
- Abate by
- Nov 27, 2007
Recent events (3)
- — J (S)
- — F (S)
- — Z (S)
1910.1200 E01
- Issued
- Oct 30, 2007
- Abate by
- Nov 27, 2007
- Penalty
- Initial $750 · Current $465 Reduced
Recent events (3)
- — J (S) $465.00
- — F (S) $465.00
- — Z (S) $750.00
1910.1200 H01
- Issued
- Oct 30, 2007
- Abate by
- Nov 27, 2007
Recent events (3)
- — J (S)
- — F (S)
- — Z (S)
More inspections at P & M Industries, INC.
View P & M Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311159321.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.