TULSA, OK —
OSHA Inspection: P & M INDUSTRIES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of P & M INDUSTRIES, INC. in 4450 S MINGO ROAD, TULSA, OK 74146 (NAICS 332999). OSHA activity number 341246072.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- P & M INDUSTRIES, INC.
- Site address
- 4450 S MINGO ROAD
- City
- TULSA
- State
- OK
- ZIP
- 74146
- Mailing
- PO BOX 471069, TULSA, OK 74147
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 12
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.178 L04 III
- Issued
- May 2, 2016
- Abate by
- May 10, 2016
- Penalty
- Initial $1,360 · Current $816 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: On or about February 3, 2016, and at times prior thereto, the employer did not conduct an evaluation of industrial truck operators performance at least every 3 years. Employees were exposed to the hazard of being struck by/crushed by the forklift and/or a falling load.
Recent events (2)
- — I (S) $816
- — Z (S) $1360
1910.178 Q07
- Issued
- May 2, 2016
- Abate by
- May 4, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: On or about February 2, 2016, the employer did not ensure that industrial trucks were examined before being placed into service. Employees were exposed to the hazard of being struck by the forklift and/or a falling load.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.179 J02
- Issued
- May 2, 2016
- Abate by
- May 4, 2016
- Penalty
- Initial $1,700 · Current $1,020 Reduced
General-duty citation text
29 CFR 1910.179(j)(2): The following items were not inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, including observation during operation for any defects which might appear between regular inspections: On or about February 3, 2016, and at times prior thereto, operating mechanisms, hydraulic systems, hooks and hoists were not inspected on a monthly or daily basis for any defects. Employees were exposed to the hazard of being struck by/crushed by a falling load.
Recent events (2)
- — I (S) $1020
- — Z (S) $1700
1910.179 J03
- Issued
- May 2, 2016
- Abate by
- May 10, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months: On or about February 3, 2016, and at time prior thereto, a periodic inspection of cranes was not conducted in the past 12 months. Employees were exposed to the hazard of being struck by/crushed by a falling load.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at P & M Industries, INC.
View P & M Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341246072.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.