GREENSBORO, NC —
OSHA Inspection: METALCRAFT OF MAYVILLE SE, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of METALCRAFT OF MAYVILLE SE, INC. in 7055 CAINDALE DR., GREENSBORO, NC 27409 (NAICS 332710). OSHA activity number 311234199.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- METALCRAFT OF MAYVILLE SE, INC.
- Site address
- 7055 CAINDALE DR.
- City
- GREENSBORO
- State
- NC
- ZIP
- 27409
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- SIC code (legacy)
- 3599
- Employees
- 170
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
22 citations on file for this inspection.
95012901
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
- Penalty
- Initial $2,275 · Current $1,525 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish each of his employees conditions of employment and a place of employment free of recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to being struck by or crushed by the powered industrial trucks in the event of an upset: a)establishment, shipping and receiving area-an employee operates a forklift to load and unload trucks. The employee was not wearing the seatbelt provided on the forklift which could result in the employee being thrown from the lift truck, resulting in being struck by or crushed, in case of a vehicular accident. One feasible and acceptable abatement method to correct this hazard is to provide refresher training for the employees and enforce a disciplinary policy requiring employees to use the seatbelt available when operating the lift.
Recent events (2)
- — I (S) $1525.00
- — Z (S) $2275.00
1910.178 K01
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
- Penalty
- Initial $2,275 · Current $1,525 Reduced
Recent events (2)
- — I (S) $1525.00
- — Z (S) $2275.00
1910.212 A01
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
- Penalty
- Initial $2,275 · Current $1,525 Reduced
Recent events (2)
- — I (S) $1525.00
- — Z (S) $2275.00
1910.212 A03 II
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
- Penalty
- Initial $2,275 · Current $1,525 Reduced
Recent events (2)
- — I (S) $1525.00
- — Z (S) $2275.00
1910.215 A04
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
- Penalty
- Initial $1,625 · Current $1,100 Reduced
Recent events (2)
- — I (S) $1100.00
- — Z (S) $1625.00
1910.215 B09
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
- Penalty
- Initial $1,625 · Current $1,000 Reduced
Recent events (2)
- — I (S) $1000.00
- — Z (S) $1625.00
1910.219 C02 I
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
- Penalty
- Initial $813 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $813.00
1910.255 C02
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
- Penalty
- Initial $813 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $813.00
1910.305 B02
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
- Penalty
- Initial $1,138 · Current $800 Reduced
Recent events (2)
- — I (S) $800.00
- — Z (S) $1138.00
1910.110 F02 I
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
1910.147 C06 II
- Issued
- Apr 16, 2008
- Abate by
- Jun 3, 2008
1910.151 C
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
1910.157 C01
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
1910.157 C04
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
1910.157 G01
- Issued
- Apr 16, 2008
- Abate by
- Jun 3, 2008
1910.176 B
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
1910.178 G10
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
1910.178 L04 III
- Issued
- Apr 16, 2008
- Abate by
- May 12, 2008
1910.242 B
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
1910.303 B02
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
1910.303 G01 II
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
1910.334 A02 I
- Issued
- Apr 16, 2008
- Abate by
- Apr 21, 2008
More inspections at Metalcraft of Mayville SE, INC.
View Metalcraft of Mayville SE, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311234199.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.