MOBILE, AL — 2008-04-07 00:00:00

OSHA Inspection: SUPERIOR MASONRY, INC.

Planned inspection · Safety discipline

At a glance

On 2008-04-07 00:00:00, OSHA opened a planned safety inspection of SUPERIOR MASONRY, INC. in 4686 AIRPORT BLVD., MOBILE, AL 36609 (NAICS 238140). OSHA activity number 311803670.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Superior Masonry, INC. — free Get an email when a new federal OSHA severe-injury report for Superior Masonry, INC. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: SUPERIOR MASONRY, INC.
Site address: 4686 AIRPORT BLVD.
City: MOBILE
State: AL
ZIP: 36609
Mailing: 3401 BELTLINE PARK DRIVE NORTH, MOBILE, AL 36617

What kind of inspection was it?

Inspection type: Planned (H)
Scope: Complete (A)
Discipline: Safety
Advance notice: No
Union status: N

When did the case open and close?

Opened: 2008-04-07 00:00:00
Closing conference: 2008-04-07 00:00:00
Case closed: 2009-05-20 00:00:00
Last modified: 2014-07-30 00:00:00
Data loaded: 2014-08-02 02:12:45

Establishment context

NAICS code: 238140
SIC code (legacy): 1741
Employees: 7
Ownership type: A

Citations

15 citations on file for this inspection.

5(a)(1)

Serious Gravity 03 1 instance 1 exposed

Issued: Apr 29, 2008
Abate by: May 2, 2008
Penalty: Initial $875 · Current $875

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The
employer did not
furnish a place of employment which was free from any recognized hazards
that are causing
or likely to cause death or serious physical harm to employees in that
employees were
exposed to struck-by and crushing hazards:
a)Meyer's Market: Employer failed to require an employee operating a JCB
506C Loadall VIN #SLP508CO4EO587858 to maintained a fastened seat belt
to prevent being ejected from the vehicle while lifting bundles of blocks
and
bricks.
A feasible and acceptable method of abatement to correct this hazard
includes, but are not
limited to, the following:
1)Conform to the requirements of the JCB 506C Operator's Manual page 30
that
states, "If you do not wear your seat belt you could be thrown about
inside the
machine, or thrown out of the machine and crushed.  You must wear a seat
belt when using the machine.  Fasten the seat belt before starting the
engine".
2)Conform to the requirements of ASME/ANSI B56. 1a-1989 Addenda to
ASME/ANSI B56.1-1988 and ASME B56.1-1993 Safety Standard that requires
the use of seat belts and for manufacturers to develop a program to
retrofit
older models.

Recent events (2)

2008-05-21 00:00:00 — I (S) $875.00
2008-04-29 00:00:00 — Z (S) $875.00

1926.701 B

Serious Gravity 10 1 instance 7 exposed

Issued: Apr 29, 2008
Abate by: May 2, 2008
Penalty: Initial $2,500 · Current $875 Reduced

Recent events (2)

2008-05-21 00:00:00 — I (S) $875.00
2008-04-29 00:00:00 — Z (S) $2500.00

1910.1200 H01

Serious Gravity 02 1 instance 2 exposed

Issued: Apr 29, 2008
Abate by: May 23, 2008
Penalty: Initial $1,000 · Current $1,000

Hazardous substances 1430P1040577

Recent events (2)

2008-05-20 00:00:00 — I (S) $1000.00
2008-04-29 00:00:00 — Z (S) $1000.00

1904.29 B01

Deleted Other-than-serious Gravity 00 4 instances 60 exposed

Issued: Apr 29, 2008
Abate by: May 9, 2008
Penalty: Initial $500

Recent events (2)

2008-05-20 00:00:00 — I (O)
2008-04-29 00:00:00 — Z (O) $500.00