BORDENTOWN, NJ —
OSHA Inspection: NWL TRANSFORMERS
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of NWL TRANSFORMERS in 312 RISING SUN ROAD, BORDENTOWN, NJ 08505 (NAICS 335311). OSHA activity number 312867914.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NWL TRANSFORMERS
- Site address
- 312 RISING SUN ROAD
- City
- BORDENTOWN
- State
- NJ
- ZIP
- 08505
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 335311
- SIC code (legacy)
- 3612
- Employees
- 350
- Ownership type
- A
Citations
8 citations on file for this inspection.
5(a)(1)
- Issued
- May 8, 2009
- Abate by
- Jun 4, 2009
- Penalty
- Initial $1,875 · Current $1,144 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to an amputation hazard: a) Plant 2, Press Brake Area - Where point of operation guarding was not feasible, the employer did not develop and implement a minimum safe distance program for the protection of press brake operators. On or about 4/2/09. One feasible and acceptable abatement method is to develop and implement a safe distance program that conforms to the requirements of ANSI B11.3-1982, Paragraph 6.1.4.3 and OSHA Directive CPL 2-1.25. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.
Recent events (2)
- — I (S) $1144.00
- — Z (S) $1875.00
1910.95 D01
- Issued
- May 8, 2009
- Abate by
- May 13, 2009
- Penalty
- Initial $1,125 · Current $686 Reduced
Recent events (2)
- — I (S) $686.00
- — Z (S) $1125.00
1910.95 G01
- Issued
- May 8, 2009
- Abate by
- Jun 4, 2009
- Penalty
- Initial $1,125 · Current $686 Reduced
Recent events (2)
- — I (S) $686.00
- — Z (S) $1125.00
1910.95 K01
- Issued
- May 8, 2009
- Abate by
- Jun 4, 2009
- Penalty
- Initial $1,125 · Current $686 Reduced
Recent events (2)
- — I (S) $686.00
- — Z (S) $1125.00
1910.147 C06 I
- Issued
- May 8, 2009
- Abate by
- Jul 18, 2009
- Penalty
- Initial $1,875 · Current $1,144 Reduced
Recent events (3)
- — P (S) $1144.00
- — I (S) $1144.00
- — Z (S) $1875.00
1910.253 B04 III
- Issued
- May 8, 2009
- Abate by
- May 13, 2009
- Penalty
- Initial $1,875 · Current $1,144 Reduced
Recent events (2)
- — I (S) $1144.00
- — Z (S) $1875.00
1910.335 A01 I
- Issued
- May 8, 2009
- Abate by
- Jul 18, 2009
- Penalty
- Initial $1,875 · Current $1,144 Reduced
Recent events (2)
- — I (S) $1144.00
- — Z (S) $1875.00
1910.146 C02
- Issued
- May 8, 2009
- Abate by
- Jun 4, 2009
Recent events (2)
- — I (O)
- — Z (O)
More inspections at NWL Transformers
View NWL Transformers's full OSHA safety record →
More inspections in this industry (NAICS 335311)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 312867914.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.