Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: TYCO ELECTRONICS CORPORATION

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of TYCO ELECTRONICS CORPORATION in 8420 TRIAD DRIVE, COLFAX, NC 27409 (NAICS 335931). OSHA activity number 313600918.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Tyco Electronics Corporation — free Get an email when a new federal OSHA severe-injury report for Tyco Electronics Corporation is published. One employer, no account, unsubscribe in one click.
Site address
8420 TRIAD DRIVE
City
COLFAX
State
NC
ZIP
27409
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
335931
SIC code (legacy)
3643
Employees
161
Ownership type
A
Industry flags
Construction health.

8 citations on file for this inspection.

95012901

Deleted Serious 1 instance 1 exposed
Issued
Dec 1, 2009
Abate by
Jan 20, 2010
Penalty
Initial $613
North Carolina General Statute 95-129(1) of the Occupational Safety and
Health Act of North
Carolina:  The employer did not furnish to each of his employees
conditions of employment and
a place of employment which were free from recognized hazards that were
causing or likely to
cause death or serious physical harm to employees in that employees were
exposed to
combustible dust fires and/or explosions:
a)Powder Room/polymer blending room- employees were exposed to the hazards
associated with combustible/explosive dust produced during the blending
operation.
Abatement Notes: Among other methods of abatement one feasible method would
be to follow the guidelines provided in the National Fire Protection
Association
(NFPA) 654 Standard for the Prevention of Fire and Dust Explosions from the
Manufacturing, Processing, and Handling of Combustible Particulate Solids.
Recent events (2)
  • — J (S)
  • — Z (S) $613.00

1910.22 A01

Deleted Serious 1 instance 1 exposed
Issued
Dec 1, 2009
Abate by
Dec 15, 2009
Penalty
Initial $613
Recent events (2)
  • — J (S)
  • — Z (S) $613.00

1910.132 A

Serious 1 instance 1 exposed
Issued
Dec 1, 2009
Abate by
Dec 4, 2009
Penalty
Initial $438 · Current $438
Recent events (2)
  • — J (S) $438.00
  • — Z (S) $438.00

1910.307 C

Deleted Serious 1 instance 1 exposed
Issued
Dec 1, 2009
Abate by
Dec 4, 2009
Penalty
Initial $613
Recent events (2)
  • — J (S)
  • — Z (S) $613.00

1910.37 B06

Other-than-serious 1 instance 1 exposed
Issued
Dec 1, 2009
Abate by
Dec 4, 2009
Recent events (2)
  • — J (O)
  • — Z (O)

1910.147 C06 II

Other-than-serious 1 instance 1 exposed
Issued
Dec 1, 2009
Abate by
Dec 4, 2009
Recent events (2)
  • — J (O)
  • — Z (O)

1910.303 B07 IV

Other-than-serious 1 instance 1 exposed
Issued
Dec 1, 2009
Abate by
Dec 4, 2009
Recent events (2)
  • — J (O)
  • — Z (O)

1910.303 G01 II

Other-than-serious 1 instance 1 exposed
Issued
Dec 1, 2009
Abate by
Dec 4, 2009
Recent events (2)
  • — J (O)
  • — Z (O)

View Tyco Electronics Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 313600918.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.