CINAMINSON, NJ —
OSHA Inspection: EDKER INDUSTRIES INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of EDKER INDUSTRIES INC. in 1401 UNION LANDING ROAD, CINAMINSON, NJ 08077 (NAICS 332322). OSHA activity number 314211673.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EDKER INDUSTRIES INC.
- Site address
- 1401 UNION LANDING ROAD
- City
- CINAMINSON
- State
- NJ
- ZIP
- 08077
- Mailing
- P. O. BOX 196, RIVERTON, NJ 08077
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- SIC code (legacy)
- 3444
- Employees
- 23
- Ownership type
- A
Citations
15 citations on file for this inspection.
5(a)(1)
- Issued
- Jun 15, 2010
- Abate by
- Jul 9, 2010
- Penalty
- Initial $750 · Current $525 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to unguarded points of operation on press brakes: a) Press brake area - There was no minimum safe distance program for employees who operated the six hydraulic press brakes including the Darley 165 ton brakes, the Darley 50 ton brakes, and the Accurpress brakes. There were no fixed guards on any of the brakes. On or about 5/4/10. Feasible method of abatement: Provide tools for employees to use to keep their hands at least four inches from the point of operation and to train them to properly use the tools. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $525.00
- — Z (S) $750.00
1910.95 D01
- Issued
- Jun 15, 2010
- Abate by
- Jun 18, 2010
- Penalty
- Initial $750 · Current $525 Reduced
8111
Recent events (2)
- — I (S) $525.00
- — Z (S) $750.00
1910.95 G01
- Issued
- Jun 15, 2010
- Abate by
- Jul 9, 2010
- Penalty
- Initial $750 · Current $525 Reduced
8111
Recent events (2)
- — I (S) $525.00
- — Z (S) $750.00
1910.95 I02 IIA
- Issued
- Jun 15, 2010
- Abate by
- Jun 18, 2010
- Penalty
- Initial $750 · Current $525 Reduced
8111
Recent events (2)
- — I (S) $525.00
- — Z (S) $750.00
1910.95 K01
- Issued
- Jun 15, 2010
- Abate by
- Aug 6, 2010
- Penalty
- Initial $750 · Current $525 Reduced
8111
Recent events (2)
- — I (S) $525.00
- — Z (S) $750.00
1910.132 F01
- Issued
- Jun 15, 2010
- Abate by
- Jul 9, 2010
- Penalty
- Initial $450 · Current $315 Reduced
Recent events (2)
- — I (S) $315.00
- — Z (S) $450.00
1910.133 A01
- Issued
- Jun 15, 2010
- Abate by
- Jul 9, 2010
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C01
- Issued
- Jun 15, 2010
- Abate by
- Jul 9, 2010
- Penalty
- Initial $750
Recent events (2)
- — I (S)
- — Z (S) $750.00
1910.215 A04
- Issued
- Jun 15, 2010
- Abate by
- Jun 18, 2010
- Penalty
- Initial $450 · Current $315 Reduced
Recent events (2)
- — I (S) $315.00
- — Z (S) $450.00
1910.215 B09
- Issued
- Jun 15, 2010
- Abate by
- Jun 18, 2010
Recent events (2)
- — I (S)
- — Z (S)
1910.217 C01 I
- Issued
- Jun 15, 2010
- Abate by
- Jul 9, 2010
- Penalty
- Initial $750 · Current $525 Reduced
Recent events (2)
- — I (S) $525.00
- — Z (S) $750.00
1910.217 E01 I
- Issued
- Jun 15, 2010
- Abate by
- Jul 16, 2010
Recent events (2)
- — I (S)
- — Z (S)
1910.219 B01
- Issued
- Jun 15, 2010
- Abate by
- Jun 18, 2010
- Penalty
- Initial $750 · Current $525 Reduced
Recent events (2)
- — I (S) $525.00
- — Z (S) $750.00
1910.303 B02
- Issued
- Jun 15, 2010
- Abate by
- Jun 18, 2010
- Penalty
- Initial $450 · Current $315 Reduced
Recent events (2)
- — I (S) $315.00
- — Z (S) $450.00
1910.305 B01
- Issued
- Jun 15, 2010
- Abate by
- Jun 18, 2010
- Penalty
- Initial $450 · Current $315 Reduced
Recent events (2)
- — I (S) $315.00
- — Z (S) $450.00
More inspections at Edker Industries INC.
View Edker Industries INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 314211673.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.