NAPLES, FL ·
OSHA Inspection: PELICAN WIRE CO.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PELICAN WIRE CO. in 3650 SHAW BLVD, NAPLES, FL 34117 (NAICS 331422). OSHA activity number 314267303.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PELICAN WIRE CO.
- Site address
- 3650 SHAW BLVD
- City
- NAPLES
- State
- FL
- ZIP
- 34117
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331422
- SIC code (legacy)
- 3357
- Employees
- 46
- Ownership type
- Private (A)
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Apr 13, 2011
- Abate by
- Apr 27, 2011
- Penalty
- Initial $2,975 · Current $2,231 Reduced
General-duty citation text
Section 5(a)1 of the Occupational Safety and Health Act of 1970: The employer did not furnish to each of his employees employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: On or about 11/16/2010, at Pelican Wire Co., Naples, FL. a. At the maintenance department, an employee was exposed to caught by and struck by hazards while working with a lathe (Birmingham, Model CT-144G) that lacked a provision to prevent automatic restart upon restoration of power. b. At the maintenance department, an employee was exposed to caught by and struck by hazards while working with a milling machine (Bridgeport, Model 8F) that lacked a provision to prevent automatic restart upon restoration of power. c. At the maintenance department, an employee was exposed to caught by and struck by hazards while working with a milling machine (Ultima, Property #111003) that lacked a provision to prevent automatic restart upon restoration of power. d. At the maintenance department, an employee was exposed to caught by and struck by hazards while working with a drill press (Walker-Turner, Serial #111017) that lacked a provision to prevent automatic restart upon restoration of power. e. At the maintenance department, an employee was exposed to caught by and struck by hazards while working with a lathe (Enco, Model 111-1450) that lacked a provision to prevent automatic restart upon restoration of power. Among the feasible and useful methods to correct the hazard is installing a magnetic switch to prevent automatic restart upon restoration of power after a power failure. Note:Certification of abatement must be submitted for this citation item.ion
Recent events (2)
- · I (S) $2231.00
- · Z (S) $2975.00
1910.212 A01
- Issued
- Apr 13, 2011
- Abate by
- Apr 27, 2011
- Penalty
- Initial $2,975 · Current $2,231 Reduced
Recent events (2)
- · I (S) $2231.00
- · Z (S) $2975.00
1910.212 B
- Issued
- Apr 13, 2011
- Abate by
- Apr 27, 2011
- Penalty
- Initial $1,785 · Current $1,339 Reduced
Recent events (2)
- · I (S) $1339.00
- · Z (S) $1785.00
1910.219 C04 I
- Issued
- Apr 13, 2011
- Abate by
- Apr 27, 2011
- Penalty
- Initial $1,785 · Current $1,339 Reduced
Recent events (2)
- · I (S) $1339.00
- · Z (S) $1785.00
1910.219 E03 I
- Issued
- Apr 13, 2011
- Abate by
- Apr 27, 2011
- Penalty
- Initial $1,785 · Current $1,339 Reduced
Recent events (2)
- · I (S) $1339.00
- · Z (S) $1785.00
1910.219 F01
- Issued
- Apr 13, 2011
- Abate by
- Apr 27, 2011
- Penalty
- Initial $2,975 · Current $2,231 Reduced
Recent events (2)
- · I (S) $2231.00
- · Z (S) $2975.00
1910.219 F03
- Issued
- Apr 13, 2011
- Abate by
- Apr 27, 2011
- Penalty
- Initial $1,785 · Current $1,339 Reduced
Recent events (2)
- · I (S) $1339.00
- · Z (S) $1785.00
1910.304 G05
- Issued
- Apr 13, 2011
- Abate by
- Apr 27, 2011
- Penalty
- Initial $1,785 · Current $1,339 Reduced
Recent events (2)
- · I (S) $1339.00
- · Z (S) $1785.00
1904.29 A
- Issued
- Apr 13, 2011
- Abate by
- Apr 27, 2011
1910.22 D01
- Issued
- Apr 13, 2011
- Abate by
- Apr 27, 2011
1910.133 A01
- Issued
- Apr 13, 2011
- Abate by
- Apr 27, 2011
1910.1200 G08
- Issued
- Apr 13, 2011
- Abate by
- Apr 20, 2011
More inspections at Pelican Wire CO.
View Pelican Wire CO.'s full OSHA safety record →
More inspections in this industry (NAICS 331422)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 314267303.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.