MULBERRY, FL —
OSHA Inspection: MARDEN INDUSTRIES, INC.
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of MARDEN INDUSTRIES, INC. in 502 BRADSHAW INDUSTRIAL PKWY.- HWY. 640 EAST, MULBERRY, FL 33860 (NAICS 333111). OSHA activity number 314736562.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARDEN INDUSTRIES, INC.
- Site address
- 502 BRADSHAW INDUSTRIAL PKWY.- HWY. 640 EAST
- City
- MULBERRY
- State
- FL
- ZIP
- 33860
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- Yes
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333111
- SIC code (legacy)
- 3523
- Employees
- 16
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 20, 2010
- Abate by
- Dec 24, 2010
- Penalty
- Initial $4,900 · Current $3,430 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by falling equipment which was not adequately braced or supported while the equipment was being fabricated. a) On 7/7/2010 a Renovator Frame was being fabricated at the facility. The frame was lifted and positioned upright on its side so that an employee could perform welding on the bottom portion of the frame. The frame was not adequately supported in the upright position. The frame fell over causing fatal injuries to the employee that had been performing the welding. Among other methods, one feasible and acceptable abatement method to correct this hazard would be to develop and implement specific procedures to ensure that equipment being fabricated is positively secured in a manner that will prevent movement or falling. The specific procedures must be clearly communicated to employees and the use of the specific procedures must be strictly enforced.
Recent events (2)
- — I (S) $3430.00
- — Z (S) $4900.00
1910.147 C01
- Issued
- Dec 20, 2010
- Abate by
- Jan 31, 2011
- Penalty
- Initial $1,500 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1500.00
1910.178 L01 I
- Issued
- Dec 20, 2010
- Abate by
- Jan 12, 2011
- Penalty
- Initial $750 · Current $525 Reduced
Recent events (2)
- — I (S) $525.00
- — Z (S) $750.00
1910.212 A01
- Issued
- Dec 20, 2010
- Abate by
- Jan 12, 2011
- Penalty
- Initial $1,500 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1500.00
1910.212 A04
- Issued
- Dec 20, 2010
- Abate by
- Jan 12, 2011
- Penalty
- Initial $750 · Current $525 Reduced
Recent events (2)
- — I (S) $525.00
- — Z (S) $750.00
More inspections at Marden Industries, INC.
View Marden Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333111)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 314736562.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.