LITTLE ROCK, AR ·
OSHA Inspection: WELSPUN TUBULAR LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of WELSPUN TUBULAR LLC in 9301 FRAZIER PIKE, LITTLE ROCK, AR 72206 (NAICS 331210). OSHA activity number 314737206.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WELSPUN TUBULAR LLC
- Site address
- 9301 FRAZIER PIKE
- City
- LITTLE ROCK
- State
- AR
- ZIP
- 72206
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331210
- SIC code (legacy)
- 3317
- Employees
- 600
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
26 citations on file for this inspection.
5(a)(1)
- Issued
- Jan 31, 2011
- Abate by
- Mar 17, 2011
- Penalty
- Initial $5,000 · Current $5,000
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: At the Spiral Plant on or about January 19, 2011 and prior thereto, employees walking through and working in the pipe conveyor/transfer lines were exposed to the hazard of being struck by or caught between moving pipes in instances such as but not limited to the following: a.Final Finish at the south side of the skid east of OD Grinding b.Final Finish at the north side of the skid east of OD Grinding c.Final Finish at the north and south conveyor/transfer line south of the Quality Control work platform d.Beveling at the north and south conveyor/transfer line north of the Quality Control work platform e.Pre-Visual at the north and south conveyor/transfer line south of the pre-Visual Platform f.Pre-Visual at the south side of the skid west of the Pre-Visual Platform g.Skelp Plasma at he north and south conveyor/transfer line h.Stencil Area at the north and south conveyor/transfer line i.Beveling Area at the north and south conveyor/transfer line west of the Beveler and east of the exit door j.Final Finish at the OD Grinding platform Among other means, the following are feasible and acceptable methods to correct this hazard: 1.Install stairs and a walkway over the pipe conveyor/transfer lines. 2.Restrict Access to the pipe conveyor/transfer lines using guarding. 3.Develop, implement and require the use of lockout while employees are performing work when they are in the pipe conveyor/transfer lines or on platforms in the travel path of pipes.
Recent events (2)
- · I (S) $5000.00
- · Z (S) $5000.00
5(a)(1)
- Issued
- Jan 31, 2011
- Abate by
- Mar 4, 2011
- Penalty
- Initial $5,000 · Current $5,000
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: At the Spiral Plant on or about January 19, 2011 and prior thereto, employees walking through and working in the pipe conveyor/transfer lines were exposed to the hazard of being struck by or caught between moving pipes in instances such as but not limited to the following: a.Final Finish at the south side of the skid east of OD Grinding b.Final Finish at the north side of the skid east of OD Grinding c.Final Finish at the north and south conveyor/transfer line south of the Quality
Recent events (2)
- · I (S) $5000.00
- · Z (S) $5000.00
1910.23 A05
- Issued
- Jan 31, 2011
- Abate by
- Mar 18, 2011
- Penalty
- Initial $5,000 · Current $4,000 Reduced
Recent events (2)
- · I (O) $4000.00
- · Z (S) $5000.00
1910.23 A08
- Issued
- Jan 31, 2011
- Abate by
- Mar 4, 2011
Recent events (2)
- · I (O)
- · Z (S)
1910.23 C01
- Issued
- Jan 31, 2011
- Abate by
- Mar 18, 2011
- Penalty
- Initial $5,000 · Current $5,000
Recent events (2)
- · I (S) $5000.00
- · Z (S) $5000.00
1910.23 C03
- Issued
- Jan 31, 2011
- Abate by
- Mar 18, 2011
Recent events (2)
- · I (S)
- · Z (S)
1910.24 H
- Issued
- Jan 31, 2011
- Abate by
- Mar 18, 2011
- Penalty
- Initial $2,500 · Current $1,750 Reduced
Recent events (2)
- · I (S) $1750.00
- · Z (S) $2500.00
1910.36 A03
- Issued
- Jan 31, 2011
- Abate by
- Mar 18, 2011
- Penalty
- Initial $5,000 · Current $4,000 Reduced
Recent events (2)
- · I (O) $4000.00
- · Z (S) $5000.00
1910.36 E01
- Issued
- Jan 31, 2011
- Abate by
- Mar 18, 2011
Recent events (2)
- · I (O)
- · Z (S)
1910.37 A03
- Issued
- Jan 31, 2011
- Abate by
- Mar 18, 2011
- Penalty
- Initial $5,000 · Current $5,000
Recent events (2)
- · I (S) $5000.00
- · Z (S) $5000.00
1910.146 C01
- Issued
- Jan 31, 2011
- Abate by
- Mar 18, 2011
- Penalty
- Initial $5,000 · Current $5,000
Recent events (2)
- · I (S) $5000.00
- · Z (S) $5000.00
1910.147 C04 I
- Issued
- Jan 31, 2011
- Abate by
- Mar 18, 2011
- Penalty
- Initial $5,000 · Current $4,000 Reduced
Recent events (2)
- · I (S) $4000.00
- · Z (S) $5000.00
1910.212 A01
- Issued
- Jan 31, 2011
- Abate by
- Mar 18, 2011
- Penalty
- Initial $5,000 · Current $5,000
Recent events (2)
- · I (S) $5000.00
- · Z (S) $5000.00
1910.212 A03 II
- Issued
- Jan 31, 2011
- Abate by
- Mar 18, 2011
- Penalty
- Initial $2,500 · Current $1,750 Reduced
Recent events (2)
- · I (O) $1750.00
- · Z (S) $2500.00
1910.219 C02 I
- Issued
- Jan 31, 2011
- Abate by
- Mar 18, 2011
- Penalty
- Initial $5,000 · Current $1,750 Reduced
Recent events (2)
- · I (O) $1750.00
- · Z (S) $5000.00
1910.252 B04 IV
- Issued
- Jan 31, 2011
- Abate by
- Mar 7, 2011
- Penalty
- Initial $2,500 · Current $1,750 Reduced
Recent events (2)
- · I (S) $1750.00
- · Z (S) $2500.00
1910.304 G05
- Issued
- Jan 31, 2011
- Abate by
- Feb 3, 2011
- Penalty
- Initial $2,500 · Current $1,750 Reduced
Recent events (2)
- · I (O) $1750.00
- · Z (S) $2500.00
1910.305 B01 I
- Issued
- Jan 31, 2011
- Abate by
- Feb 3, 2011
- Penalty
- Initial $2,500 · Current $1,750 Reduced
Recent events (2)
- · I (O) $1750.00
- · Z (S) $2500.00
1910.305 G01 IVA
- Issued
- Jan 31, 2011
- Abate by
- Feb 3, 2011
- Penalty
- Initial $2,500 · Current $1,750 Reduced
Recent events (2)
- · I (O) $1750.00
- · Z (S) $2500.00
1910.305 G01 IVB
- Issued
- Jan 31, 2011
- Abate by
- Feb 3, 2011
Recent events (2)
- · I (O)
- · Z (S)
5(a)(1)
- Issued
- Jan 31, 2011
- Abate by
- Sep 4, 2011
- Penalty
- Initial $5,000 · Current $5,000
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: At the Spiral Plant on or about January 19, 2011 and prior thereto, employees walking through and working in the pipe conveyor/transfer lines were exposed to the hazard of being struck by or caught between moving pipes in instances such as but not limited to the following: a.Final Finish at the south side of the skid east of OD Grinding b.Final Finish at the north side of the skid east of OD Grinding c.Final Finish at the north and south conveyor/transfer line south of the Quality Control work platform d.Beveling at the north and south conveyor/transfer line north of the Quality Control work platform e.Pre-Visual at the north and south conveyor/transfer line south of the pre-Visual Platform f.Pre-Visual at the south side of the skid west of the Pre-Visual Platform g.Skelp Plasma at he north and south conveyor/transfer line h.Stencil Area at the north and south conveyor/transfer line i.Beveling Area at the north and south conveyor/transfer line west of the Beveler and east of the exit door j.Final Finish at the OD Grinding platform Among other means, the following are feasible and acceptable methods to correct this hazard: 1.Install stairs and a walkway over the pipe conveyor/transfer lines. 2.Restrict Access to the pipe conveyor/transfer lines using guarding. 3.Develop, implement and require the use of lockout while employees are performing work when they are in the pipe conveyor/transfer lines or on platforms in the travel path of pipes.
Recent events (2)
- · I (S) $5000.00
- · Z (S) $5000.00
1910.37 A03
- Issued
- Jan 31, 2011
- Abate by
- Sep 4, 2011
- Penalty
- Initial $5,000
Recent events (2)
- · I (S)
- · Z (S) $5000.00
1910.23 C01
- Issued
- Jan 31, 2011
- Abate by
- May 23, 2011
- Penalty
- Initial $5,000 · Current $4,000 Reduced
Recent events (3)
- · P (S) $4000.00
- · I (S) $4000.00
- · Z (S) $5000.00
1910.23 C03
- Issued
- Jan 31, 2011
- Abate by
- Mar 18, 2011
Recent events (2)
- · I (S)
- · Z (S)
1910.212 A01
- Issued
- Jan 31, 2011
- Abate by
- Mar 18, 2011
- Penalty
- Initial $5,000
Recent events (2)
- · I (S)
- · Z (S) $5000.00
1910.178 P01
- Issued
- Jan 31, 2011
- Abate by
- Feb 3, 2011
Recent events (2)
- · I (O)
- · Z (O)
More inspections at Welspun Tubular LLC
View Welspun Tubular LLC's full OSHA safety record →
More inspections in this industry (NAICS 331210)
More inspections in AR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 314737206.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.