STEELE, AL ·
OSHA Inspection: SUNBELT FABRICATORS, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SUNBELT FABRICATORS, INC in 113 INDUSTRIAL DRIVE, STEELE, AL 35987 (NAICS 332313). OSHA activity number 315183574.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUNBELT FABRICATORS, INC
- Site address
- 113 INDUSTRIAL DRIVE
- City
- STEELE
- State
- AL
- ZIP
- 35987
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332313
- SIC code (legacy)
- 3443
- Employees
- 20
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
26 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 2, 2011
- Abate by
- Oct 15, 2011
- Penalty
- Initial $3,000 · Current $1,500 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish to each of his employees a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to his employees in that employees were exposed to a struck-by hazard: (a)On or about 02/15/2011 - Main plant, the hooks from the overhead crane being used to lift a personnel platform and materials were missing the safety latch. Among other methods, one feasible and acceptable method to correct this hazard would be to comply with the requirements of the American Society of Mechanical Engineers (ASME), B30.10-2009 which states that a hook latch that is inoperable shall be repaired or replaced. ASME B30.23-1998, Section 10-2.10.6 Repairs and Modifications states that the attachment of a personnel lifting platform shall be a type that can be positively locked.ely
Recent events (2)
- · I (S) $1500.00
- · Z (S) $3000.00
1910.36 D01
- Issued
- Aug 2, 2011
- Abate by
- Aug 5, 2011
- Penalty
- Initial $2,400 · Current $1,200 Reduced
Recent events (2)
- · I (S) $1200.00
- · Z (S) $2400.00
1910.37 B02
- Issued
- Aug 2, 2011
- Abate by
- Aug 12, 2011
- Penalty
- Initial $2,400 · Current $1,200 Reduced
Recent events (2)
- · I (S) $1200.00
- · Z (S) $2400.00
1910.37 B05
- Issued
- Aug 2, 2011
- Abate by
- Aug 12, 2011
Recent events (2)
- · I (S)
- · Z (S)
1910.147 C01
- Issued
- Aug 2, 2011
- Abate by
- Oct 15, 2011
- Penalty
- Initial $3,000 · Current $1,500 Reduced
Recent events (2)
- · I (S) $1500.00
- · Z (S) $3000.00
1910.178 A04
- Issued
- Aug 2, 2011
- Abate by
- Aug 12, 2011
- Penalty
- Initial $3,000 · Current $1,500 Reduced
Recent events (2)
- · I (S) $1500.00
- · Z (S) $3000.00
1910.178 L01 I
- Issued
- Aug 2, 2011
- Abate by
- Aug 12, 2011
- Penalty
- Initial $2,400 · Current $1,200 Reduced
Recent events (2)
- · I (S) $1200.00
- · Z (S) $2400.00
1910.179 G01 V
- Issued
- Aug 2, 2011
- Abate by
- Oct 15, 2011
- Penalty
- Initial $2,400 · Current $1,200 Reduced
Recent events (2)
- · I (S) $1200.00
- · Z (S) $2400.00
1910.212 A01
- Issued
- Aug 2, 2011
- Abate by
- Oct 15, 2011
- Penalty
- Initial $3,000 · Current $1,500 Reduced
Recent events (2)
- · I (S) $1500.00
- · Z (S) $3000.00
1910.212 A03 II
- Issued
- Aug 2, 2011
- Abate by
- Oct 15, 2011
Recent events (2)
- · I (S)
- · Z (S)
1910.212 A05
- Issued
- Aug 2, 2011
- Abate by
- Oct 15, 2011
- Penalty
- Initial $2,400 · Current $1,200 Reduced
Recent events (2)
- · I (S) $1200.00
- · Z (S) $2400.00
1910.213 H01
- Issued
- Aug 2, 2011
- Abate by
- Aug 10, 2011
- Penalty
- Initial $3,000 · Current $1,500 Reduced
Recent events (2)
- · I (S) $1500.00
- · Z (S) $3000.00
1910.215 A04
- Issued
- Aug 2, 2011
- Abate by
- Aug 12, 2011
- Penalty
- Initial $3,000 · Current $1,500 Reduced
Recent events (2)
- · I (S) $1500.00
- · Z (S) $3000.00
1910.215 B09
- Issued
- Aug 2, 2011
- Abate by
- Aug 12, 2011
Recent events (2)
- · I (S)
- · Z (S)
1910.215 D03
- Issued
- Aug 2, 2011
- Abate by
- Aug 10, 2011
Recent events (2)
- · I (S)
- · Z (S)
1910.252 B02 III
- Issued
- Aug 2, 2011
- Abate by
- Oct 15, 2011
- Penalty
- Initial $2,400 · Current $1,200 Reduced
Recent events (2)
- · I (S) $1200.00
- · Z (S) $2400.00
1910.254 D08
- Issued
- Aug 2, 2011
- Abate by
- Aug 12, 2011
- Penalty
- Initial $3,000 · Current $1,500 Reduced
Recent events (2)
- · I (S) $1500.00
- · Z (S) $3000.00
1910.305 B01 II
- Issued
- Aug 2, 2011
- Abate by
- Aug 12, 2011
- Penalty
- Initial $3,000 · Current $1,500 Reduced
Recent events (2)
- · I (S) $1500.00
- · Z (S) $3000.00
1910.305 G01 IVB
- Issued
- Aug 2, 2011
- Abate by
- Aug 10, 2011
- Penalty
- Initial $1,800 · Current $900 Reduced
Recent events (2)
- · I (S) $900.00
- · Z (S) $1800.00
1910.305 G02 II
- Issued
- Aug 2, 2011
- Abate by
- Aug 10, 2011
- Penalty
- Initial $2,400 · Current $1,200 Reduced
Recent events (2)
- · I (S) $1200.00
- · Z (S) $2400.00
1910.305 G02 III
- Issued
- Aug 2, 2011
- Abate by
- Aug 10, 2011
Recent events (2)
- · I (S)
- · Z (S)
1904.29 A
- Issued
- Aug 2, 2011
- Abate by
- Aug 5, 2011
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- · I (O) $500.00
- · Z (O) $1000.00
1904.29 A
- Issued
- Aug 2, 2011
- Abate by
- Aug 5, 2011
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- · I (O) $500.00
- · Z (O) $1000.00
1910.22 A01
- Issued
- Aug 2, 2011
- Abate by
- Aug 10, 2011
Recent events (2)
- · I (O)
- · Z (O)
1910.176 A
- Issued
- Aug 2, 2011
- Abate by
- Aug 5, 2011
Recent events (2)
- · I (O)
- · Z (O)
1910.179 J03
- Issued
- Aug 2, 2011
- Abate by
- Aug 12, 2011
Recent events (2)
- · I (O)
- · Z (O)
More inspections at Sunbelt Fabricators, INC
View Sunbelt Fabricators, INC's full OSHA safety record →
More inspections in this industry (NAICS 332313)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 315183574.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.