LAUREL, MS —
OSHA Inspection: MORGAN BROTHERS MILLWORK, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MORGAN BROTHERS MILLWORK, INC. in 1 BRUCE AVENUE, LAUREL, MS 39441 (NAICS 321911). OSHA activity number 315305060.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MORGAN BROTHERS MILLWORK, INC.
- Site address
- 1 BRUCE AVENUE
- City
- LAUREL
- State
- MS
- ZIP
- 39441
- Mailing
- P.O. BOX 4343, LAUREL, MS 39441
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321911
- SIC code (legacy)
- 2431
- Employees
- 93
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
11 citations on file for this inspection.
5(a)(1)
- Issued
- Nov 18, 2011
- Abate by
- Nov 23, 2011
- Penalty
- Initial $2,625 · Current $1,313 Reduced
General-duty citation text
Section 5(a)(1) of Public Law 91-596, the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that there was no functional seatbelt provided on the John Deere compact utility tractor. (a)Outdoors, North of the Bag House, on the concrete pad - On or about October 6, 2011, employees operating the John Deere Model 1070 compact utility tractor, with a Model 440 front-end bucket and Roll Over Protective Structure/Falling Object Protective Structure attached, because the female-half of the seatbelt was broken and could not fasten. Among other methods, one feasible and acceptable abatement method to correct this hazard is to purchase a replacement seatbelt half and install it.
Recent events (2)
- — I (S) $1312.50
- — Z (S) $2625.00
5(a)(1)
- Issued
- Nov 18, 2011
- Abate by
- Nov 23, 2011
General-duty citation text
Section 5(a)(1) of Public Law 91-596, the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were operating the Caterpillar forklift while not wearing the provided seatbelt. (a)Outdoors, North of the Dust Collection Shed/Baghouse - On or about October 6, 2011 employee(s) operating the Caterpillar Forklift FL3 were exposed to injury because the operator was not wearing the provided seatbelt. Among other methods, one feasible and acceptable abatement method to correct this hazard is to retrain all exposed employees, and enforce seatbelt usage.
1910.22 A01
- Issued
- Nov 18, 2011
- Abate by
- Jan 4, 2012
- Penalty
- Initial $2,100 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $2100.00
1910.22 A02
- Issued
- Nov 18, 2011
- Abate by
- Jan 4, 2012
1910.213 H01
- Issued
- Nov 18, 2011
- Abate by
- Dec 14, 2011
- Penalty
- Initial $2,100 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $2100.00
1910.213 H04
- Issued
- Nov 18, 2011
- Abate by
- Nov 24, 2011
1910.219 I02
- Issued
- Nov 18, 2011
- Abate by
- Nov 23, 2011
- Penalty
- Initial $2,625 · Current $1,313 Reduced
Recent events (2)
- — I (S) $1312.50
- — Z (S) $2625.00
1910.242 B
- Issued
- Nov 18, 2011
- Abate by
- Dec 14, 2011
- Penalty
- Initial $1,575 · Current $788 Reduced
Recent events (2)
- — I (S) $787.50
- — Z (S) $1575.00
1910.305 G01 IVA
- Issued
- Nov 18, 2011
- Abate by
- Jan 4, 2012
- Penalty
- Initial $1,575 · Current $788 Reduced
Recent events (2)
- — I (S) $787.50
- — Z (S) $1575.00
1910.307 C02 I
- Issued
- Nov 18, 2011
- Abate by
- Jan 4, 2012
- Penalty
- Initial $2,625 · Current $1,313 Reduced
Recent events (2)
- — I (S) $1312.50
- — Z (S) $2625.00
1910.1200 H03 IV
- Issued
- Nov 18, 2011
- Abate by
- Dec 14, 2011
More inspections at Morgan Brothers Millwork, INC.
View Morgan Brothers Millwork, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321911)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 315305060.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.