BAY MINETTE, AL —
OSHA Inspection: STANDARD FURNITURE MANUFACTURING COMPANY, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of STANDARD FURNITURE MANUFACTURING COMPANY, INC. in 801 HWY 31 SOUTH, BAY MINETTE, AL 36507 (NAICS 337122). OSHA activity number 315454173.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STANDARD FURNITURE MANUFACTURING COMPANY, INC.
- Site address
- 801 HWY 31 SOUTH
- City
- BAY MINETTE
- State
- AL
- ZIP
- 36507
- Mailing
- P. O. BOX 1089, BAY MINETTE, AL 36507
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337122
- SIC code (legacy)
- 2511
- Employees
- 700
- Ownership type
- A
Citations
15 citations on file for this inspection.
5(a)(1)
- Issued
- Jun 3, 2011
- Abate by
- Jul 8, 2011
- Penalty
- Initial $3,400 · Current $2,400 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck by hazards while using hoist(s) that had not been inspected to move material: a)801 Highway 31 South, Bay Minette, AL 36507; On or about May 17, 2011 and at times prior thereto employees were exposed to struck by hazards while using a CMI overhead hoist that had not had a documented periodic inspection performed at least annually. This hoist in the Hog area had a missing safety latch and the capacity of the hoist was not legible. A feasible and acceptable method to correct this hazard is to conduct frequent and periodic inspections of the hoist for missing or defective equipment in accordance with ASME B30.10-1999, Hooks and ASME B30.16.-1998, Overhead Hoists (Underhung). b)801 Highway 31 South, Bay Minette, AL 36507; On or about May 17, 2011 and at times prior thereto employees were exposed to struck by hazards while using a Yale One Ton Hand Chain Hoist in the foil Slitter area that had not had a documented periodic inspection performed at least annually. A feasible and acceptable method to correct this hazard is to conduct frequent and periodic inspections of the hoist for missing or defective equipment in accordance with ASME B30.10-1999, Hooks and ASME B30.16.-1998, Overhead Hoists (Underhung).
Recent events (2)
- — I (S) $2400.00
- — Z (S) $3400.00
1910.23 C01
- Issued
- Jun 3, 2011
- Abate by
- Jul 8, 2011
- Penalty
- Initial $3,400 · Current $2,400 Reduced
Recent events (2)
- — I (S) $2400.00
- — Z (S) $3400.00
1910.23 D01
- Issued
- Jun 3, 2011
- Abate by
- Jul 8, 2011
Recent events (2)
- — I (S)
- — Z (S)
1910.24 C
- Issued
- Jun 3, 2011
- Abate by
- Jul 8, 2011
- Penalty
- Initial $3,400 · Current $2,400 Reduced
Recent events (2)
- — I (S) $2400.00
- — Z (S) $3400.00
1910.136 A
- Issued
- Jun 3, 2011
- Abate by
- Jun 22, 2011
- Penalty
- Initial $5,100 · Current $5,100
Recent events (2)
- — I (S) $5100.00
- — Z (S) $5100.00
1910.212 A03 II
- Issued
- Jun 3, 2011
- Abate by
- Jul 8, 2011
- Penalty
- Initial $3,400 · Current $2,400 Reduced
Recent events (2)
- — I (S) $2400.00
- — Z (S) $3400.00
1910.303 B02
- Issued
- Jun 3, 2011
- Abate by
- Jul 8, 2011
- Penalty
- Initial $2,550 · Current $1,600 Reduced
Recent events (2)
- — I (S) $1600.00
- — Z (S) $2550.00
1910.305 B01 I
- Issued
- Jun 3, 2011
- Abate by
- Jul 8, 2011
- Penalty
- Initial $4,250 · Current $2,800 Reduced
Recent events (2)
- — I (S) $2800.00
- — Z (S) $4250.00
1910.305 B01 II
- Issued
- Jun 3, 2011
- Abate by
- Jun 15, 2011
1910.305 G01 IVB
- Issued
- Jun 3, 2011
- Abate by
- Jun 15, 2011
1910.305 G01 IIID
- Issued
- Jun 3, 2011
- Abate by
- Jun 29, 2011
1904.29 B01
- Issued
- Jun 3, 2011
- Abate by
- Jul 8, 2011
- Penalty
- Initial $1,000 · Current $600 Reduced
Recent events (2)
- — I (O) $600.00
- — Z (O) $1000.00
1904.32 B03
- Issued
- Jun 3, 2011
- Abate by
- Jun 15, 2011
- Penalty
- Initial $1,000 · Current $1,000
Recent events (2)
- — I (O) $1000.00
- — Z (O) $1000.00
1904.32 B03
- Issued
- Jun 3, 2011
- Abate by
- Jun 15, 2011
- Penalty
- Initial $1,000 · Current $1,000
Recent events (2)
- — I (O) $1000.00
- — Z (O) $1000.00
1904.32 B03
- Issued
- Jun 3, 2011
- Abate by
- Jun 15, 2011
- Penalty
- Initial $1,000 · Current $1,000
Recent events (2)
- — I (O) $1000.00
- — Z (O) $1000.00
More inspections at Standard Furniture Manufacturing Company, INC.
View Standard Furniture Manufacturing Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337122)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 315454173.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.