AUSTIN, TX —
OSHA Inspection: ELECTRONIC RECYCLING AND TRADING, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ELECTRONIC RECYCLING AND TRADING, INC in 15508 BRATTON LANE, AUSTIN, TX 78728 (NAICS 423930). OSHA activity number 315629923.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ELECTRONIC RECYCLING AND TRADING, INC
- Site address
- 15508 BRATTON LANE
- City
- AUSTIN
- State
- TX
- ZIP
- 78728
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423930
- SIC code (legacy)
- 5093
- Employees
- 30
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
14 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 9, 2012
- Abate by
- Oct 19, 2012
- Penalty
- Initial $5,390 · Current $3,000 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazards of propagation of a fire, deflagration, and/or explosion outside the area of the initial fire, deflagration, and/or explosion. a) For recycling work performed with the ring mill: On or about January 10, 2012, and at times prior thereto, the employer did not ensure that the ring mill used to crush electronic equipment was equipped with explosion venting, exposing employees operating and working near the ring mill to the hazards of fire and explosion. b) The dust collector system was located inside the building without explosion venting located away from workers. Feasible abatement methods to correct the hazard identified above include, among others: implement National Fire Protection Association (NFPA) 68, 2002, Standard on Explosion Protection by Deflagration Venting for appropriate explosion venting. Relief panels, windows or other venting devices shall be designed to prevent reclosing after relieving the explosion pressure and shall be attached with retention cables or restrained by equivalent means so that they will not become projectiles upon relief. Implement standards for suppression, containment or inerting systems as described in NFPA 69 (2008) Standard on Explosion Prevention Systems. Locate the dust collector system (baghouse) outside the building. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the obligation, including describing the steps that it is taking to ensure that employees are protected from explosions in the ring mill.
Recent events (2)
- — I (S) $3000.00
- — Z (S) $5390.00
5(a)(1)
- Issued
- Jul 9, 2012
- Abate by
- Jul 13, 2012
- Penalty
- Initial $5,390 · Current $3,000 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazards of the escape of combustible electronic equipment dust from equipment and its accumulation in work areas, increasing the risk of fire, deflagration, and/or explosion. For recycling work performed with the ring mill: On or about January 10, 2012, and at times prior thereto, the employer did not ensure that the work area in and around the ring mill was kept free of escaping combustible dust which was likely to ignite or explode, exposing employees to the hazards of fire and explosion. Among other feasible abatement methods to correct this hazard, one method is to implement the requirement of NFPA 654, 2006, Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids. Employer must implement control meausures to reduce and manage dust, including: Appropriately designed and maintained dust collection systems, minimization of the escape of dust from equipment, and inspection/cleaning at regular intervals. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the obligation, including describing the steps that it is taking to ensure that combustible dust is prevented from escaping from the process.
Recent events (2)
- — I (S) $3000.00
- — Z (S) $5390.00
1910.22 A01
- Issued
- Jul 9, 2012
- Abate by
- Jul 13, 2012
- Penalty
- Initial $5,390 · Current $3,000 Reduced
Recent events (2)
- — I (S) $3000.00
- — Z (S) $5390.00
1910.145 C03
- Issued
- Jul 9, 2012
- Abate by
- Jul 26, 2012
- Penalty
- Initial $2,310 · Current $665 Reduced
Recent events (2)
- — I (S) $665.00
- — Z (S) $2310.00
1910.146 C01
- Issued
- Jul 9, 2012
- Abate by
- Jul 13, 2012
- Penalty
- Initial $3,850 · Current $2,000 Reduced
Recent events (2)
- — I (S) $2000.00
- — Z (S) $3850.00
1910.146 C02
- Issued
- Jul 9, 2012
- Abate by
- Jul 13, 2012
1910.146 D02
- Issued
- Jul 9, 2012
- Abate by
- Sep 19, 2012
- Penalty
- Initial $3,850 · Current $2,000 Reduced
Recent events (2)
- — I (S) $2000.00
- — Z (S) $3850.00
1910.146 D03
- Issued
- Jul 9, 2012
- Abate by
- Sep 19, 2012
1910.146 E01
- Issued
- Jul 9, 2012
- Abate by
- Sep 19, 2012
1910.146 G01
- Issued
- Jul 9, 2012
- Abate by
- Jul 26, 2012
- Penalty
- Initial $3,850 · Current $2,000 Reduced
Recent events (2)
- — I (S) $2000.00
- — Z (S) $3850.00
1910.147 C04 IIB
- Issued
- Jul 9, 2012
- Abate by
- Oct 19, 2012
- Penalty
- Initial $5,390 · Current $3,000 Reduced
Recent events (2)
- — I (S) $3000.00
- — Z (S) $5390.00
1910.147 C05 IID
- Issued
- Jul 9, 2012
- Abate by
- Jul 26, 2012
1910.147 C07 IA
- Issued
- Jul 9, 2012
- Abate by
- Jul 26, 2012
- Penalty
- Initial $5,390 · Current $3,000 Reduced
Recent events (2)
- — I (S) $3000.00
- — Z (S) $5390.00
1910.178 L01 I
- Issued
- Jul 9, 2012
- Abate by
- Jul 26, 2012
- Penalty
- Initial $3,850 · Current $665 Reduced
Recent events (2)
- — I (S) $665.00
- — Z (S) $3850.00
More inspections at Electronic Recycling and Trading, INC
View Electronic Recycling and Trading, INC's full OSHA safety record →
More inspections in this industry (NAICS 423930)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 315629923.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.