CANTON, GA —
OSHA Inspection: D & D MANUFACTURING COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of D & D MANUFACTURING COMPANY, INC. in 140 N INDUSTRIAL WAY, CANTON, GA 30115 (NAICS 333611). OSHA activity number 315739847.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- D & D MANUFACTURING COMPANY, INC.
- Site address
- 140 N INDUSTRIAL WAY
- City
- CANTON
- State
- GA
- ZIP
- 30115
- Mailing
- P.O. BOX 799, HOLLY SPRINGS, GA 30142
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333611
- SIC code (legacy)
- 3511
- Employees
- 25
- Ownership type
- A
Citations
9 citations on file for this inspection.
5(a)(1)
- Issued
- Mar 20, 2012
- Abate by
- Apr 27, 2012
- Penalty
- Initial $4,200 · Current $2,520 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to amputation hazards created by the operation of power press brakes with unprotected treadle/pedals. a) Shop - On or about 10/18/11 employees operated the Wysong power shears and no protective device was installed to prevent the accidental activation by falling or moving objects, or by human error. Abatement method: Among other methods, a feasible and acceptable abatement method to correct this hazard is to provide a safety device for the treadle/pedal that meets the requirements of ANSI B11.3-2007 section 6.10.4 Safety Requirements for Power brakes, which states: When provided, foot controls shall be protected to prevent actuation from falling or moving objects, or from unintended activation. 1) You are not limited to the abatement methods suggested above. 2) The methods explained are general and may not be effective in all cases. 3) The employer is responsible for selecting and carrying out the appropriate method. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $2520.00
- — Z (S) $4200.00
1910.147 C04 I
- Issued
- Mar 20, 2012
- Abate by
- May 21, 2012
- Penalty
- Initial $4,200 · Current $2,520 Reduced
Recent events (2)
- — I (S) $2520.00
- — Z (S) $4200.00
1910.212 A01
- Issued
- Mar 20, 2012
- Abate by
- May 21, 2012
- Penalty
- Initial $4,200 · Current $2,520 Reduced
Recent events (2)
- — I (S) $2520.00
- — Z (S) $4200.00
1904.32 B03
- Issued
- Mar 20, 2012
- Abate by
- Apr 27, 2012
1904.32 B03
- Issued
- Mar 20, 2012
- Abate by
- Apr 27, 2012
1904.32 B04
- Issued
- Mar 20, 2012
- Abate by
- Apr 27, 2012
1910.134 E01
- Issued
- Mar 20, 2012
- Abate by
- Apr 27, 2012
1910.134 F02
- Issued
- Mar 20, 2012
- Abate by
- Apr 27, 2012
1910.147 C07 IV
- Issued
- Mar 20, 2012
- Abate by
- May 21, 2012
Recent events (2)
- — I (O)
- — Z (O)
More inspections in this industry (NAICS 333611)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 315739847.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.